============================================
== make benchmark ==========================
== eg/qtest.sh ==========================
============================================
== Thu, Jun  4, 2020  7:26:49 PM

eg/q_benchmark -10 -10 -10 -10
eg/q_benchmark: Temporarily add "$PWD/bin" to $PATH for access to rbox

============================================
== eg/q_benchmark [test] [precision-count] [other-count] [pinched-count] [time-count]
== Time and precision benchmarks for qhull
============================================

[jun'20] Many timing figures 5-10% faster than jun'19 results.  No change to code

'q_benchmark -10 -10 -10 -10' Thu, Jun  4, 2020  7:26:50 PM

# $Id: //main/2019/qhull/eg/q_benchmark-ok.txt#5 $$DateTime: 2020/06/05 16:33:18 $
# $Id: //main/2019/qhull/eg/q_benchmark-ok.txt#5 $$DateTime: 2020/06/05 16:33:18 $
qhull => qhull_r 8.0.0 (2020.1.r 2020/05/29)
-rwxr-xr-x 1 bbarber 197121 339968 Jun  4 16:16 /var/tmp/qhull-zip-2020-06-04-16-17/zip/qhull-2020.1/bin/qhull
rbox => Version: 2019/11/10
-rwxr-xr-x 1 bbarber 197121 32768 Jun  4 16:16 /var/tmp/qhull-zip-2020-06-04-16-17/zip/qhull-2020.1/bin/rbox
MINGW64_NT-10.0-18362 kelwyn 3.0.7-338.x86_64 2019-04-30 21:52 UTC x86_64 Msys

Logging to /var/tmp/qhull-zip-2020-06-04-16-17/zip/qhull-2020.1/eg/qhull-benchmark.log and eg/qhull-benchmark-show.log

==============================
=== N_PRECISION test cases ===
==============================
== difficult cases for qhull Thu, Jun  4, 2020  7:26:51 PM

====================
== Convex hull of fuzzy cube (large flat facets)
====================

Testing -- rbox 1000000 W1e-13 D2 t1 | qhull Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-864647.log
Test -- t1
  CPU seconds to compute hull (after input): 0.249
Test -- t2
  CPU seconds to compute hull (after input): 0.196
Test -- t3
  CPU seconds to compute hull (after input): 0.21
Test -- t4
  CPU seconds to compute hull (after input): 0.215
Test -- t5
  CPU seconds to compute hull (after input): 0.197
Test -- t6
  CPU seconds to compute hull (after input): 0.221
Test -- t7
  CPU seconds to compute hull (after input): 0.192
Test -- t8
  CPU seconds to compute hull (after input): 0.213
Test -- t9
  CPU seconds to compute hull (after input): 0.197
Test -- t10
  CPU seconds to compute hull (after input): 0.212
1591313239 Test 10 runs in 28 seconds (ave. 2800 msec) -- rbox 1000000 W1e-13 D2 t1 | qhull Tv

Testing -- rbox 500000 W1e-13 D3 t1 | qhull Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-802003.log
Test -- t1
  CPU seconds to compute hull (after input): 0.565
Test -- t2
  CPU seconds to compute hull (after input): 0.572
Test -- t3
  CPU seconds to compute hull (after input): 0.508
Test -- t4
  CPU seconds to compute hull (after input): 0.485
Test -- t5
  CPU seconds to compute hull (after input): 0.504
Test -- t6
  CPU seconds to compute hull (after input): 0.574
Test -- t7
  CPU seconds to compute hull (after input): 0.486
Test -- t8
  CPU seconds to compute hull (after input): 0.517
Test -- t9
  CPU seconds to compute hull (after input): 0.505
Test -- t10
  CPU seconds to compute hull (after input): 0.541
1591313286 Test 10 runs in 46 seconds (ave. 4600 msec) -- rbox 500000 W1e-13 D3 t1 | qhull Tv

Testing -- rbox 10000 W1e-13 D4 t1 | qhull Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-875422.log
Test -- t1
QH6347 qhull precision error (qh_mergefacet): wide merge for facet f15532 into f15531 for mergetype 7 (dupridge).  maxdist  0 (0.0x) mindist -1.1e-12 (112.6x) vertexdist 0.074  Allow with 'Q12' (allow-wide)
Test -- t2
  CPU seconds to compute hull (after input): 0.134
Test -- t3
  CPU seconds to compute hull (after input): 0.086
Test -- t4
  CPU seconds to compute hull (after input): 0.123
Test -- t5
  CPU seconds to compute hull (after input): 0.09
Test -- t6
  CPU seconds to compute hull (after input): 0.115
Test -- t7
  CPU seconds to compute hull (after input): 0.084
Test -- t8
  CPU seconds to compute hull (after input): 0.103
Test -- t9
  CPU seconds to compute hull (after input): 0.099
Test -- t10
  CPU seconds to compute hull (after input): 0.094
1591313292 Test 10 runs in 5 seconds (ave. 500 msec) -- rbox 10000 W1e-13 D4 t1 | qhull Tv

Testing -- rbox 2000 W1e-13 D5 t1 | qhull Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-76284.log
Test -- t1
  CPU seconds to compute hull (after input): 0.532
Test -- t2
  CPU seconds to compute hull (after input): 0.479
Test -- t3
QH6347 qhull precision error (qh_mergefacet): wide merge for facet f75175 into f75221 for mergetype 7 (dupridge).  maxdist  0 (0.0x) mindist -1.6e-12 (96.1x) vertexdist 0.048  Allow with 'Q12' (allow-wide)
  Maximum distance of point above facet: 2.1e-13 (12.8x)
Test -- t4
  CPU seconds to compute hull (after input): 0.495
Test -- t5
  CPU seconds to compute hull (after input): 0.47
Test -- t6
  CPU seconds to compute hull (after input): 0.612
Test -- t7
  CPU seconds to compute hull (after input): 0.529
Test -- t8
QH6271 qhull topology error (qh_check_dupridge): wide merge (100.6x wider) due to dupridge between f23261 and f23245 (vertex dist 0.16), merge dist 2e-12, while processing p54
Test -- t9
  CPU seconds to compute hull (after input): 0.558
Test -- t10
  CPU seconds to compute hull (after input): 0.488
1591313301 Test 10 runs in 8 seconds (ave. 800 msec) -- rbox 2000 W1e-13 D5 t1 | qhull Tv

Testing -- rbox 1000 W1e-13 D6 t1 | qhull Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-411054.log
Test -- t1
  CPU seconds to compute hull (after input): 2.168
Test -- t2
QH6271 qhull topology error (qh_check_dupridge): wide merge (78677624350.8x wider) due to dupridge between f372429 and f372158 (vertex dist 0.48), merge dist 0.011, while processing p166
Test -- t3
  CPU seconds to compute hull (after input): 1.993
Test -- t4
  CPU seconds to compute hull (after input): 2.038
Test -- t5
  CPU seconds to compute hull (after input): 1.961
Test -- t6
  CPU seconds to compute hull (after input): 2.044
Test -- t7
  CPU seconds to compute hull (after input): 2.055
Test -- t8
  CPU seconds to compute hull (after input): 2.153
Test -- t9
  CPU seconds to compute hull (after input): 1.98
Test -- t10
  CPU seconds to compute hull (after input): 2.067
1591313330 Test 10 runs in 28 seconds (ave. 2800 msec) -- rbox 1000 W1e-13 D6 t1 | qhull Tv

====================
== narrow lense
====================

Testing -- rbox 1000000 L100000 s G1e-6 D2 t1 | qhull Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-881887.log
Test -- t1
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.175
Test -- t2
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.17
Test -- t3
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.184
Test -- t4
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.207
Test -- t5
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.174
Test -- t6
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.185
Test -- t7
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.227
Test -- t8
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.195
Test -- t9
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.181
Test -- t10
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.233
1591313354 Test 10 runs in 23 seconds (ave. 2300 msec) -- rbox 1000000 L100000 s G1e-6 D2 t1 | qhull Tv

Testing -- rbox 10000 L100000 s G1e-6 D3 t1 | qhull Q12 Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-685335.log
Test -- t1
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.574
Test -- t2
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.555
Test -- t3
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.572
Test -- t4
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.578
  Maximum distance of point above facet: 8.3e-14 (14.9x)
Test -- t5
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.56
Test -- t6
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.594
Test -- t7
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.601
Test -- t8
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.623
Test -- t9
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.633
  Maximum distance of point above facet: 1.1e-13 (19.4x)
Test -- t10
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.599
1591313373 Test 10 runs in 18 seconds (ave. 1800 msec) -- rbox 10000 L100000 s G1e-6 D3 t1 | qhull Q12 Tv

Testing -- rbox 5000 L100000 s G1e-6 D4 t1 | qhull Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-287921.log
Test -- t1
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.493
Test -- t2
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.508
Test -- t3
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.506
Test -- t4
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 1.305
Test -- t5
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.458
Test -- t6
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 1.343
  Maximum distance of point above facet: 2.1e-13 (21.0x)
Test -- t7
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.556
Test -- t8
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.459
Test -- t9
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.462
Test -- t10
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.488
1591313394 Test 10 runs in 20 seconds (ave. 2000 msec) -- rbox 5000 L100000 s G1e-6 D4 t1 | qhull Tv

Testing -- rbox 1000 L100000 s G1e-6 D5 t1 | qhull Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-490938.log
Test -- t1
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.161
Test -- t2
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.165
Test -- t3
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.173
Test -- t4
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.17
Test -- t5
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.164
Test -- t6
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.162
Test -- t7
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.165
Test -- t8
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.172
Test -- t9
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.17
Test -- t10
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.173
1591313401 Test 10 runs in 6 seconds (ave. 600 msec) -- rbox 1000 L100000 s G1e-6 D5 t1 | qhull Tv

Testing -- rbox 400 L100000 s G1e-6 D6 t1 | qhull Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-225277.log
Test -- t1
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.354
Test -- t2
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.364
Test -- t3
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.4
Test -- t4
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.346
Test -- t5
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.354
Test -- t6
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.327
Test -- t7
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.355
Test -- t8
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.353
Test -- t9
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.318
Test -- t10
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.352
1591313409 Test 10 runs in 7 seconds (ave. 700 msec) -- rbox 400 L100000 s G1e-6 D6 t1 | qhull Tv

====================
== cone
====================

Testing -- rbox 100000 s Z1 G1e-13 D2 t1 | qhull Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-26570.log
Test -- t1
  CPU seconds to compute hull (after input): 0.026
Test -- t2
  CPU seconds to compute hull (after input): 0.024
Test -- t3
  CPU seconds to compute hull (after input): 0.042
Test -- t4
  CPU seconds to compute hull (after input): 0.027
Test -- t5
  CPU seconds to compute hull (after input): 0.032
Test -- t6
  CPU seconds to compute hull (after input): 0.02
Test -- t7
  CPU seconds to compute hull (after input): 0.02
Test -- t8
  CPU seconds to compute hull (after input): 0.019
Test -- t9
  CPU seconds to compute hull (after input): 0.02
Test -- t10
  CPU seconds to compute hull (after input): 0.029
1591313414 Test 10 runs in 4 seconds (ave. 400 msec) -- rbox 100000 s Z1 G1e-13 D2 t1 | qhull Tv

Testing -- rbox 10000 s Z1 G1e-13 D3 t1 | qhull Q12 Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-160478.log
Test -- t1
QH7088 Qhull precision warning: in post-processing (qh_check_maxout) p8 for f18922 is 1.7e-12 above hidden facet f41175 nearest vertices 0.0001
QH7088 Qhull precision warning: in post-processing (qh_check_maxout) p11 for f11008 is 1.7e-12 above hidden facet f41175 nearest vertices 0.0001
QH7088 Qhull precision warning: in post-processing (qh_check_maxout) p27 for f29977 is 1.7e-12 above hidden facet f41175 nearest vertices 0.0001
QH7088 Qhull precision warning: in post-processing (qh_check_maxout) p73 for f29524 is 1.7e-12 above hidden facet f41175 nearest vertices 0.0001
QH7088 Qhull precision warning: in post-processing (qh_check_maxout) p148 for f29629 is 1.7e-12 above hidden facet f41175 nearest vertices 0.0001
QH7088 Qhull precision warning: in post-processing (qh_check_maxout) p273 for f19304 is 1.7e-12 above hidden facet f41175 nearest vertices 0.0001
QH7088 Qhull precision warning: in post-processing (qh_check_maxout) p1065 for f11292 is 1.7e-12 above hidden facet f41175 nearest vertices 0.0001
QH7088 Qhull precision warning: in post-processing (qh_check_maxout) p1189 for f11280 is 1.7e-12 above hidden facet f41175 nearest vertices 0.0001
QH7088 Qhull precision warning: in post-processing (qh_check_maxout) p2536 for f29640 is 1.7e-12 above hidden facet f41175 nearest vertices 0.0001
  CPU seconds to compute hull (after input): 0.505
  Maximum distance of point above facet: 1.7e-12 (308.8x)
Test -- t2
  CPU seconds to compute hull (after input): 0.467
Test -- t3
  CPU seconds to compute hull (after input): 1.49
  Maximum distance of point above facet: 8.5e-14 (15.2x)
Test -- t4
  CPU seconds to compute hull (after input): 0.533
Test -- t5
  CPU seconds to compute hull (after input): 0.647
Test -- t6
  CPU seconds to compute hull (after input): 0.47
Test -- t7
QH7088 Qhull precision warning: in post-processing (qh_check_maxout) p21 for f56395 is 1.2e-11 above hidden facet f84424 nearest vertices 6.2e-05
QH7088 Qhull precision warning: in post-processing (qh_check_maxout) p36 for f109744 is 1.2e-11 above hidden facet f84424 nearest vertices 6.2e-05
QH7088 Qhull precision warning: in post-processing (qh_check_maxout) p217 for f104110 is 1.2e-11 above hidden facet f84424 nearest vertices 6.2e-05
QH7088 Qhull precision warning: in post-processing (qh_check_maxout) p564 for f89945 is 1.2e-11 above hidden facet f84424 nearest vertices 6.2e-05
QH7088 Qhull precision warning: in post-processing (qh_check_maxout) p2226 for f56971 is 1.2e-11 above hidden facet f84424 nearest vertices 6.2e-05
QH7088 Qhull precision warning: in post-processing (qh_check_maxout) p8038 for f89945 is 1.2e-11 above hidden facet f84424 nearest vertices 6.2e-05
QH7088 Qhull precision warning: in post-processing (qh_check_maxout) p9660 for f104202 is 1.2e-11 above hidden facet f84424 nearest vertices 6.2e-05
  CPU seconds to compute hull (after input): 2.016
  Maximum distance of point above facet: 1.2e-11 (2123.2x)
Test -- t8
  CPU seconds to compute hull (after input): 1.515
  Maximum distance of point above facet: 5.9e-13 (106.8x)
Test -- t9
  CPU seconds to compute hull (after input): 0.513
  Maximum distance of point above facet: 1.9e-13 (33.5x)
Test -- t10
  CPU seconds to compute hull (after input): 0.435
1591313440 Test 10 runs in 26 seconds (ave. 2600 msec) -- rbox 10000 s Z1 G1e-13 D3 t1 | qhull Q12 Tv

Testing -- rbox 2000 s Z1 G1e-13 D4 t1 | qhull Q12 Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-564357.log
Test -- t1
  CPU seconds to compute hull (after input): 3.213
Test -- t2
  CPU seconds to compute hull (after input): 3.322
  Maximum distance of point above facet: 2.5e-13 (24.5x)
Test -- t3
  CPU seconds to compute hull (after input): 2.259
Test -- t4
  CPU seconds to compute hull (after input): 0.816
Test -- t5
  CPU seconds to compute hull (after input): 1.606
Test -- t6
  CPU seconds to compute hull (after input): 0.631
Test -- t7
  CPU seconds to compute hull (after input): 1.152
Test -- t8
  CPU seconds to compute hull (after input): 1.7
Test -- t9
  CPU seconds to compute hull (after input): 1.554
Test -- t10
  CPU seconds to compute hull (after input): 0.85
1591313461 Test 10 runs in 20 seconds (ave. 2000 msec) -- rbox 2000 s Z1 G1e-13 D4 t1 | qhull Q12 Tv

Testing -- rbox 1000 s Z1 G1e-13 D5 t1 | qhull Q12 Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-767374.log
Test -- t1
  CPU seconds to compute hull (after input): 0.509
Test -- t2
  CPU seconds to compute hull (after input): 1.121
Test -- t3
QH6271 qhull topology error (qh_check_dupridge): wide merge (230539152422.1x wider) due to dupridge between f44488 and f44473 (vertex dist 0.061), merge dist 0.032, while processing p101
  CPU seconds to compute hull (after input): 0.539
  Maximum distance of vertex below facet: -0.032 (1972076014119.1x)
Test -- t4
  CPU seconds to compute hull (after input): 0.602
Test -- t5
  CPU seconds to compute hull (after input): 0.405
Test -- t6
QH6271 qhull topology error (qh_check_dupridge): wide merge (35319340797.5x wider) due to dupridge between f39960 and f39992 (vertex dist 0.072), merge dist 0.0062, while processing p696
  CPU seconds to compute hull (after input): 0.667
  Maximum distance of point above facet: 0.00026 (16181662784.3x)
  Maximum distance of vertex below facet: -0.0018 (109549989077.6x)
Test -- t7
  CPU seconds to compute hull (after input): 0.544
Test -- t8
  CPU seconds to compute hull (after input): 0.51
Test -- t9
  CPU seconds to compute hull (after input): 0.4
Test -- t10
  CPU seconds to compute hull (after input): 0.536
1591313472 Test 10 runs in 10 seconds (ave. 1000 msec) -- rbox 1000 s Z1 G1e-13 D5 t1 | qhull Q12 Tv

Testing -- rbox 400 s Z1 G1e-13 D6 t1 | qhull Q12 Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-635621.log
Test -- t1
  CPU seconds to compute hull (after input): 1.015
Test -- t2
  CPU seconds to compute hull (after input): 2.154
Test -- t3
QH6271 qhull topology error (qh_check_dupridge): wide merge (210507823427.9x wider) due to dupridge between f5405 and f5520 (vertex dist 0.19), merge dist 0.037, while processing p318
  CPU seconds to compute hull (after input): 5.686
Test -- t4
  CPU seconds to compute hull (after input): 0.884
Test -- t5
  CPU seconds to compute hull (after input): 2.565
Test -- t6
QH6271 qhull topology error (qh_check_dupridge): wide merge (271634975.9x wider) due to dupridge between f96869 and f97564 (vertex dist 0.091), merge dist 0.00015, while processing p223
  CPU seconds to compute hull (after input): 3.793
Test -- t7
QH6271 qhull topology error (qh_check_dupridge): wide merge (3447376779583.9x wider) due to dupridge between f2795 and f2801 (vertex dist 0.17), merge dist 0.16, while processing p85
QH6271 qhull topology error (qh_check_dupridge): wide merge (13981974127.2x wider) due to dupridge between f89269 and f89268 (vertex dist 0.16), merge dist 0.011, while processing p296
  CPU seconds to compute hull (after input): 2.05
  Maximum distance of point above facet: 0.0033 (134133559778.9x)
  Maximum distance of vertex below facet: -0.0067 (273160548745.7x)
Test -- t8
QH6271 qhull topology error (qh_check_dupridge): wide merge (114810705647.7x wider) due to dupridge between f2488 and f2437 (vertex dist 0.23), merge dist 0.0039, while processing p150
QH6271 qhull topology error (qh_check_dupridge): wide merge (962458297491.5x wider) due to dupridge between f8964 and f9014 (vertex dist 0.21), merge dist 0.074, while processing p351
  CPU seconds to compute hull (after input): 4.798
Test -- t9
QH6271 qhull topology error (qh_check_dupridge): wide merge (24322794639.0x wider) due to dupridge between f10036 and f10102 (vertex dist 0.13), merge dist 0.0053, while processing p237
QH6271 qhull topology error (qh_check_dupridge): wide merge (13665015104.4x wider) due to dupridge between f25745 and f25744 (vertex dist 0.12), merge dist 0.013, while processing p259
QH6271 qhull topology error (qh_check_dupridge): wide merge (5189398520.6x wider) due to dupridge between f27688 and f27087 (vertex dist 0.12), merge dist 0.005, while processing p60
  CPU seconds to compute hull (after input): 2.728
Test -- t10
  CPU seconds to compute hull (after input): 1.507
1591313509 Test 10 runs in 36 seconds (ave. 3600 msec) -- rbox 400 s Z1 G1e-13 D6 t1 | qhull Q12 Tv

==========================
=== N_OTHER test cases ===
==========================

====================
== Delaunay triangulation of fuzzy circle (large, narrow disk)
== No Qbb, highly degenerate due to narrow disk of two cospherical sets of points
====================

Testing -- rbox 10000 s W1e-13 D2 t1 | qhull d Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-374270.log
Test -- t1
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6347 qhull precision error (qh_mergefacet): wide merge for facet f13593 into f5532 for mergetype 6 (flip).  maxdist  0 (0.0x) mindist -4.3e-11 (7726.8x) vertexdist 0.00042  Allow with 'Q12' (allow-wide)
Test -- t2
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.451
  Maximum distance of point above facet: 8e-12 (1437.2x)
Test -- t3
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6347 qhull precision error (qh_mergefacet): wide merge for facet f5431 into f3337 for mergetype 6 (flip).  maxdist  0 (0.0x) mindist -3.4e-12 (614.3x) vertexdist 0.011  Allow with 'Q12' (allow-wide)
  Maximum distance of vertex below facet: -2.5e-13 (45.3x)
Test -- t4
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.453
  Maximum distance of point above facet: 2.5e-12 (455.3x)
Test -- t5
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.298
  Maximum distance of point above facet: 1.8e-12 (318.7x)
Test -- t6
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6347 qhull precision error (qh_mergefacet): wide merge for facet f2694 into f1989 for mergetype 6 (flip).  maxdist  0 (0.0x) mindist -5.5e-12 (986.3x) vertexdist 0.025  Allow with 'Q12' (allow-wide)
  Maximum distance of point above facet: 7.8e-14 (14.0x)
  Maximum distance of vertex below facet: -1.3e-13 (23.1x)
Test -- t7
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.504
  Maximum distance of point above facet: 2.6e-12 (460.3x)
Test -- t8
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 1.073
  Maximum distance of point above facet: 3.4e-13 (61.2x)
Test -- t9
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.422
  Maximum distance of point above facet: 2.2e-12 (400.0x)
Test -- t10
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH7086 Qhull precision warning: repartition coplanar point p3137 from f19949 as an outside point above hidden facet f19948 dist 2.9e-12 nearest vertices 3.4e-06
QH7086 Qhull precision warning: repartition coplanar point p8476 from f28083 as an outside point above hidden facet f28083 dist 5.7e-12 nearest vertices 1.3e-06
QH7088 Qhull precision warning: in post-processing (qh_check_maxout) p2710 for f2993 is 4.4e-12 above hidden facet f36150 nearest vertices 5.1e-07
QH6297 Qhull precision error (qh_check_maxout): large increase in qh.max_outside during post-processing dist 4.4e-12 (102.2x).  See warning QH0032/QH0033.  Allow with 'Q12' (allow-wide) and 'Pp'
  Maximum distance of point above facet: 4.4e-12 (797.8x)
1591313524 Test 10 runs in 14 seconds (ave. 1400 msec) -- rbox 10000 s W1e-13 D2 t1 | qhull d Tv

Testing -- rbox 2000 s W1e-13 D3 t1 | qhull d Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-842948.log
Test -- t1
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6347 qhull precision error (qh_mergefacet): wide merge for facet f5159 into f4940 for mergetype 6 (flip).  maxdist  0 (0.0x) mindist -3.2e-11 (3209.7x) vertexdist 0.092  Allow with 'Q12' (allow-wide)
  Maximum distance of point above facet: 2.2e-13 (22.1x)
  Maximum distance of vertex below facet: -2.2e-13 (21.4x)
Test -- t2
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.848
  Maximum distance of point above facet: 4.2e-12 (417.7x)
Test -- t3
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6347 qhull precision error (qh_mergefacet): wide merge for facet f24055 into f21217 for mergetype 6 (flip).  maxdist  0 (0.0x) mindist -1.6e-11 (1628.3x) vertexdist 0.013  Allow with 'Q12' (allow-wide)
  Maximum distance of point above facet: 1.7e-12 (171.9x)
Test -- t4
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6347 qhull precision error (qh_mergefacet): wide merge for facet f5422 into f3326 for mergetype 6 (flip).  maxdist  0 (0.0x) mindist -5.5e-12 (545.2x) vertexdist 0.056  Allow with 'Q12' (allow-wide)
  Maximum distance of point above facet: 4.8e-13 (47.8x)
  Maximum distance of vertex below facet: -3e-13 (29.6x)
Test -- t5
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6347 qhull precision error (qh_mergefacet): wide merge for facet f6567 into f5543 for mergetype 6 (flip).  maxdist  0 (0.0x) mindist -1.9e-12 (186.6x) vertexdist 0.14  Allow with 'Q12' (allow-wide)
  Maximum distance of point above facet: 3.2e-12 (317.3x)
  Maximum distance of vertex below facet: -8.1e-13 (80.2x)
Test -- t6
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH7086 Qhull precision warning: repartition coplanar point p947 from f5509 as an outside point above hidden facet f5521 dist 1.9e-12 nearest vertices 0.0032
QH6347 qhull precision error (qh_mergefacet): wide merge for facet f6036 into f6042 for mergetype 6 (flip).  maxdist 1.7e-12 (166.5x) mindist  0 (-0.0x) vertexdist 0.12  Allow with 'Q12' (allow-wide)
  Maximum distance of vertex below facet: -2e-13 (19.6x)
Test -- t7
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6347 qhull precision error (qh_mergefacet): wide merge for facet f16711 into f13078 for mergetype 6 (flip).  maxdist  0 (0.0x) mindist -6.2e-12 (615.7x) vertexdist 0.033  Allow with 'Q12' (allow-wide)
  Maximum distance of vertex below facet: -8.5e-13 (84.1x)
Test -- t8
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6347 qhull precision error (qh_mergefacet): wide merge for facet f20687 into f19136 for mergetype 6 (flip).  maxdist  0 (0.0x) mindist -9.5e-12 (947.4x) vertexdist 0.024  Allow with 'Q12' (allow-wide)
  Maximum distance of point above facet: 8.2e-12 (809.7x)
  Maximum distance of vertex below facet: -2.4e-13 (24.2x)
Test -- t9
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6347 qhull precision error (qh_mergefacet): wide merge for facet f991 into f4726 for mergetype 3 (concave).  maxdist 1.5e-13 (15.4x) mindist -1.2e-12 (123.4x) vertexdist 0.023  Allow with 'Q12' (allow-wide)
Test -- t10
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6347 qhull precision error (qh_mergefacet): wide merge for facet f2500 into f1666 for mergetype 6 (flip).  maxdist  0 (0.0x) mindist -5.5e-12 (541.1x) vertexdist 0.03  Allow with 'Q12' (allow-wide)
  Maximum distance of point above facet: 7.8e-13 (77.8x)
  Maximum distance of vertex below facet: -3e-13 (29.6x)
1591313528 Test 10 runs in 4 seconds (ave. 400 msec) -- rbox 2000 s W1e-13 D3 t1 | qhull d Tv

Testing -- rbox 1000 s W1e-13 D4 t1 | qhull d Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-510333.log
Test -- t1
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.75
  Maximum distance of point above facet: 3.5e-13 (21.2x)
Test -- t2
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 1.405
  Maximum distance of point above facet: 2e-12 (125.0x)
Test -- t3
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6347 qhull precision error (qh_mergefacet): wide merge for facet f71887 into f69472 for mergetype 6 (flip).  maxdist  0 (0.0x) mindist -2.7e-12 (165.0x) vertexdist 0.097  Allow with 'Q12' (allow-wide)
  Maximum distance of point above facet: 1.6e-12 (97.5x)
  Maximum distance of vertex below facet: -1e-12 (63.5x)
Test -- t4
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.599
  Maximum distance of point above facet: 2e-13 (12.4x)
Test -- t5
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6347 qhull precision error (qh_mergefacet): wide merge for facet f52894 into f47417 for mergetype 6 (flip).  maxdist  0 (0.0x) mindist -1.7e-12 (103.0x) vertexdist 0.075  Allow with 'Q12' (allow-wide)
  Maximum distance of point above facet: 5.7e-13 (35.6x)
  Maximum distance of vertex below facet: -3.9e-13 (24.6x)
Test -- t6
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.754
  Maximum distance of point above facet: 2.1e-13 (12.7x)
Test -- t7
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.781
  Maximum distance of point above facet: 2.6e-13 (16.0x)
Test -- t8
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6347 qhull precision error (qh_mergefacet): wide merge for facet f71726 into f40542 for mergetype 6 (flip).  maxdist  0 (0.0x) mindist -2.1e-12 (128.7x) vertexdist 0.075  Allow with 'Q12' (allow-wide)
  Maximum distance of point above facet: 2.4e-12 (149.9x)
  Maximum distance of vertex below facet: -5.8e-13 (35.9x)
Test -- t9
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.881
  Maximum distance of point above facet: 2.7e-13 (16.8x)
Test -- t10
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.72
  Maximum distance of point above facet: 6.6e-13 (40.9x)
1591313540 Test 10 runs in 11 seconds (ave. 1100 msec) -- rbox 1000 s W1e-13 D4 t1 | qhull d Tv

Testing -- rbox 200 s W1e-13  D5 t1 | qhull d Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-378580.log
Test -- t1
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.362
Test -- t2
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.258
Test -- t3
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6227 qhull topology error: Only 7 facets remain.  The input is too degenerate or the convexity constraints are too strong.
  Maximum distance of point above facet: 3.7e-13 (15.2x)
  Maximum distance of vertex below facet: -9.9e-13 (40.8x)
Test -- t4
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH7086 Qhull precision warning: repartition coplanar point p152 from f29818 as an outside point above hidden facet f24789 dist 1.6e-11 nearest vertices 0.33
  CPU seconds to compute hull (after input): 0.527
  Maximum distance of point above facet: 9.2e-13 (37.7x)
Test -- t5
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.539
Test -- t6
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.313
Test -- t7
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.406
Test -- t8
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.228
Test -- t9
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.399
Test -- t10
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.26
1591313546 Test 10 runs in 6 seconds (ave. 600 msec) -- rbox 200 s W1e-13  D5 t1 | qhull d Tv

Testing -- rbox 100 s W1e-13  D6 t1 | qhull d Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-579442.log
Test -- t1
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6227 qhull topology error: Only 8 facets remain.  The input is too degenerate or the convexity constraints are too strong.
  Maximum distance of point above facet: 8.5e-13 (26.9x)
  Maximum distance of vertex below facet: -7.6e-13 (24.1x)
Test -- t2
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6227 qhull topology error: Only 8 facets remain.  The input is too degenerate or the convexity constraints are too strong.
  Maximum distance of point above facet: 6e-13 (19.1x)
  Maximum distance of vertex below facet: -9.5e-13 (30.0x)
Test -- t3
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6227 qhull topology error: Only 8 facets remain.  The input is too degenerate or the convexity constraints are too strong.
  Maximum distance of point above facet: 5.2e-13 (15.6x)
  Maximum distance of vertex below facet: -1.2e-12 (36.9x)
Test -- t4
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6227 qhull topology error: Only 8 facets remain.  The input is too degenerate or the convexity constraints are too strong.
  Maximum distance of point above facet: 3.9e-12 (129.6x)
  Maximum distance of vertex below facet: -1e-12 (33.3x)
Test -- t5
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6227 qhull topology error: Only 8 facets remain.  The input is too degenerate or the convexity constraints are too strong.
  Maximum distance of point above facet: 6.9e-13 (21.4x)
  Maximum distance of vertex below facet: -7.9e-13 (24.8x)
Test -- t6
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6227 qhull topology error: Only 8 facets remain.  The input is too degenerate or the convexity constraints are too strong.
  Maximum distance of point above facet: 6.1e-13 (18.2x)
  Maximum distance of vertex below facet: -9.5e-13 (28.3x)
Test -- t7
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.487
Test -- t8
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6227 qhull topology error: Only 8 facets remain.  The input is too degenerate or the convexity constraints are too strong.
  Maximum distance of vertex below facet: -1.3e-12 (41.0x)
Test -- t9
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6227 qhull topology error: Only 8 facets remain.  The input is too degenerate or the convexity constraints are too strong.
  Maximum distance of vertex below facet: -6.7e-13 (21.0x)
Test -- t10
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6227 qhull topology error: Only 8 facets remain.  The input is too degenerate or the convexity constraints are too strong.
  Maximum distance of point above facet: 5e-13 (16.1x)
  Maximum distance of vertex below facet: -1.4e-12 (45.7x)
1591313551 Test 10 runs in 5 seconds (ave. 500 msec) -- rbox 100 s W1e-13  D6 t1 | qhull d Tv

===========================================================
=== N_PINCHED test cases for Q14-merge-pinched-vertices ===
===========================================================

====================
== Convex hull of fuzzy cube with point pairs (large flat facets)
====================

Testing -- rbox 1000000 W1e-13 C1,2e-13 D2 t1 | qhull Q14 Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-246827.log
Test -- t1
  CPU seconds to compute hull (after input): 0.332
Test -- t2
  CPU seconds to compute hull (after input): 0.309
Test -- t3
  CPU seconds to compute hull (after input): 0.343
Test -- t4
  CPU seconds to compute hull (after input): 0.314
Test -- t5
  CPU seconds to compute hull (after input): 0.307
Test -- t6
  CPU seconds to compute hull (after input): 0.301
Test -- t7
  CPU seconds to compute hull (after input): 0.295
Test -- t8
  CPU seconds to compute hull (after input): 0.347
Test -- t9
  CPU seconds to compute hull (after input): 0.293
Test -- t10
  CPU seconds to compute hull (after input): 0.279
1591313609 Test 10 runs in 57 seconds (ave. 5700 msec) -- rbox 1000000 W1e-13 C1,2e-13 D2 t1 | qhull Q14 Tv

Testing -- rbox 500000 W1e-13 C1,2e-13 D3 t1 | qhull Q14 Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-188493.log
Test -- t1
  CPU seconds to compute hull (after input): 0.641
Test -- t2
  CPU seconds to compute hull (after input): 0.576
Test -- t3
  CPU seconds to compute hull (after input): 0.487
Test -- t4
  CPU seconds to compute hull (after input): 0.492
Test -- t5
  CPU seconds to compute hull (after input): 0.508
Test -- t6
  CPU seconds to compute hull (after input): 0.603
Test -- t7
  CPU seconds to compute hull (after input): 0.556
Test -- t8
  CPU seconds to compute hull (after input): 0.558
Test -- t9
  CPU seconds to compute hull (after input): 0.605
Test -- t10
  CPU seconds to compute hull (after input): 0.53
1591313735 Test 10 runs in 126 seconds (ave. 12600 msec) -- rbox 500000 W1e-13 C1,2e-13 D3 t1 | qhull Q14 Tv

Testing -- rbox 20000 W1e-13 C1,2e-13 D4 t1 | qhull Q14 Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-940072.log
Test -- t1
  CPU seconds to compute hull (after input): 0.148
Test -- t2
  CPU seconds to compute hull (after input): 0.126
Test -- t3
  CPU seconds to compute hull (after input): 0.147
Test -- t4
  CPU seconds to compute hull (after input): 0.178
Test -- t5
  CPU seconds to compute hull (after input): 0.178
Test -- t6
  CPU seconds to compute hull (after input): 0.14
Test -- t7
  CPU seconds to compute hull (after input): 0.169
Test -- t8
  CPU seconds to compute hull (after input): 0.144
Test -- t9
  CPU seconds to compute hull (after input): 0.141
Test -- t10
  CPU seconds to compute hull (after input): 0.145
1591313766 Test 10 runs in 30 seconds (ave. 3000 msec) -- rbox 20000 W1e-13 C1,2e-13 D4 t1 | qhull Q14 Tv

Testing -- rbox 2000 W1e-13 C1,2e-13 D5 t1 | qhull Q14 Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-944382.log
Test -- t1
QH6347 qhull precision error (qh_mergefacet): wide merge for facet f113177 into f113175 for mergetype 7 (dupridge).  maxdist  0 (0.0x) mindist -1.5e-12 (92.2x) vertexdist 0.16  Allow with 'Q12' (allow-wide)
  Maximum distance of point above facet: 1.8e-13 (11.2x)
Test -- t2
  CPU seconds to compute hull (after input): 0.438
Test -- t3
QH7085 Qhull precision warning: repartition coplanar point p2235 from f117398 as an outside point above twisted facet f115796 dist 0.00029 nearest vertices 2.1e-13
  CPU seconds to compute hull (after input): 0.389
Test -- t4
QH7085 Qhull precision warning: repartition coplanar point p2331 from f138633 as an outside point above twisted facet f138769 dist 0.0037 nearest vertices 2.2e-13
QH7085 Qhull precision warning: repartition coplanar point p2331 from f142401 as an outside point above twisted facet f142401 dist 0.0037 nearest vertices 2.2e-13
  CPU seconds to compute hull (after input): 0.504
Test -- t5
  CPU seconds to compute hull (after input): 0.438
Test -- t6
  CPU seconds to compute hull (after input): 0.407
  Maximum distance of point above facet: 1.7e-13 (10.5x)
Test -- t7
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r15110 and r15115.  Nearest v591 and v666 dist 0.38 (25519640968939.1x)
Test -- t8
  CPU seconds to compute hull (after input): 0.459
  Maximum distance of point above facet: 2e-13 (12.4x)
Test -- t9
  CPU seconds to compute hull (after input): 0.482
  Maximum distance of point above facet: 1.9e-13 (11.5x)
  Maximum distance of vertex below facet: -1.9e-13 (11.7x)
Test -- t10
  CPU seconds to compute hull (after input): 0.425
1591313780 Test 10 runs in 13 seconds (ave. 1300 msec) -- rbox 2000 W1e-13 C1,2e-13 D5 t1 | qhull Q14 Tv

Testing -- rbox 500 W1e-13 C1,2e-13 D6 t1 | qhull Q14 Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-413060.log
Test -- t1
  CPU seconds to compute hull (after input): 1.246
  Maximum distance of point above facet: 3e-13 (12.3x)
  Maximum distance of vertex below facet: -2.9e-13 (11.9x)
Test -- t2
  CPU seconds to compute hull (after input): 1.228
  Maximum distance of point above facet: 3.1e-13 (12.7x)
  Maximum distance of vertex below facet: -2.6e-13 (10.4x)
Test -- t3
QH7085 Qhull precision warning: repartition coplanar point p512 from f323305 as an outside point above twisted facet f322364 dist 0.00083 nearest vertices 2.9e-13
  CPU seconds to compute hull (after input): 1.232
  Maximum distance of point above facet: 2.8e-13 (11.5x)
  Maximum distance of vertex below facet: -2.6e-13 (10.7x)
Test -- t4
QH6271 qhull topology error (qh_check_dupridge): wide merge (476654024777.9x wider) due to dupridge between f307863 and f307761 (vertex dist 2.6e-13), merge dist 0.092, while processing p516
Test -- t5
  CPU seconds to compute hull (after input): 1.118
  Maximum distance of point above facet: 2.8e-13 (11.3x)
  Maximum distance of vertex below facet: -2.7e-13 (11.1x)
Test -- t6
  CPU seconds to compute hull (after input): 1.231
  Maximum distance of point above facet: 2.9e-13 (12.0x)
  Maximum distance of vertex below facet: -2.9e-13 (11.8x)
Test -- t7
QH7085 Qhull precision warning: repartition coplanar point p73 from f185396 as an outside point above twisted facet f161746 dist 0.00022 nearest vertices 2.3e-13
  CPU seconds to compute hull (after input): 1.162
Test -- t8
QH6271 qhull topology error (qh_check_dupridge): wide merge (33125155946.5x wider) due to dupridge between f313208 and f313293 (vertex dist 1.4e-13), merge dist 0.016, while processing p504
  Maximum distance of point above facet: 4.9e-13 (19.7x)
  Maximum distance of vertex below facet: -3.8e-13 (15.3x)
Test -- t9
  CPU seconds to compute hull (after input): 1.196
  Maximum distance of point above facet: 2.9e-13 (11.7x)
  Maximum distance of vertex below facet: -6e-13 (24.2x)
Test -- t10
  CPU seconds to compute hull (after input): 1.176
  Maximum distance of point above facet: 3e-13 (12.1x)
  Maximum distance of vertex below facet: -3.1e-13 (12.7x)
1591313798 Test 10 runs in 17 seconds (ave. 1700 msec) -- rbox 500 W1e-13 C1,2e-13 D6 t1 | qhull Q14 Tv

====================
== Convex hull of cube with point pairs (large flat facets)
====================

Testing -- rbox 1000000 W0 C1,2e-13 D2 t1 | qhull Q14 Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-15646.log
Test -- t1
  CPU seconds to compute hull (after input): 0.292
Test -- t2
  CPU seconds to compute hull (after input): 0.286
Test -- t3
  CPU seconds to compute hull (after input): 0.299
Test -- t4
  CPU seconds to compute hull (after input): 0.353
Test -- t5
  CPU seconds to compute hull (after input): 0.319
Test -- t6
  CPU seconds to compute hull (after input): 0.362
Test -- t7
  CPU seconds to compute hull (after input): 0.312
Test -- t8
  CPU seconds to compute hull (after input): 0.312
Test -- t9
  CPU seconds to compute hull (after input): 0.306
Test -- t10
  CPU seconds to compute hull (after input): 0.364
1591313851 Test 10 runs in 52 seconds (ave. 5200 msec) -- rbox 1000000 W0 C1,2e-13 D2 t1 | qhull Q14 Tv

Testing -- rbox 100000 W0 C1,2e-13 D3 t1 | qhull Q14 Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-289927.log
Test -- t1
  CPU seconds to compute hull (after input): 0.08
Test -- t2
  CPU seconds to compute hull (after input): 0.112
Test -- t3
  CPU seconds to compute hull (after input): 0.082
Test -- t4
  CPU seconds to compute hull (after input): 0.093
Test -- t5
  CPU seconds to compute hull (after input): 0.099
Test -- t6
  CPU seconds to compute hull (after input): 0.099
Test -- t7
  CPU seconds to compute hull (after input): 0.082
Test -- t8
  CPU seconds to compute hull (after input): 0.091
Test -- t9
  CPU seconds to compute hull (after input): 0.087
Test -- t10
  CPU seconds to compute hull (after input): 0.094
1591313873 Test 10 runs in 21 seconds (ave. 2100 msec) -- rbox 100000 W0 C1,2e-13 D3 t1 | qhull Q14 Tv

Testing -- rbox 5000  W0 C1,2e-13 D4 t1 | qhull Q14 Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-26421.log
Test -- t1
QH6347 qhull precision error (qh_mergefacet): wide merge for facet f25732 into f25739 for mergetype 7 (dupridge).  maxdist 1.7e-12 (170.7x) mindist  0 (-0.0x) vertexdist 0.077  Allow with 'Q12' (allow-wide)
  Maximum distance of point above facet: 1.7e-13 (17.0x)
Test -- t2
  CPU seconds to compute hull (after input): 0.054
Test -- t3
  CPU seconds to compute hull (after input): 0.048
Test -- t4
  CPU seconds to compute hull (after input): 0.058
Test -- t5
  CPU seconds to compute hull (after input): 0.05
Test -- t6
  CPU seconds to compute hull (after input): 0.058
Test -- t7
  CPU seconds to compute hull (after input): 0.047
Test -- t8
  CPU seconds to compute hull (after input): 0.054
Test -- t9
  CPU seconds to compute hull (after input): 0.046
Test -- t10
  CPU seconds to compute hull (after input): 0.047
1591313879 Test 10 runs in 6 seconds (ave. 600 msec) -- rbox 5000  W0 C1,2e-13 D4 t1 | qhull Q14 Tv

Testing -- rbox 1000 W0 C1,2e-13 D5 t1 | qhull Q14 Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-760760.log
Test -- t1
QH7085 Qhull precision warning: repartition coplanar point p267 from f75220 as an outside point above twisted facet f75416 dist 0.0034 nearest vertices 2.3e-13
QH7085 Qhull precision warning: repartition coplanar point p267 from f75294 as an outside point above twisted facet f82791 dist 0.0035 nearest vertices 2.3e-13
  CPU seconds to compute hull (after input): 0.226
  Maximum distance of point above facet: 1.8e-13 (11.1x)
  Maximum distance of vertex below facet: -1.8e-13 (10.9x)
Test -- t2
  CPU seconds to compute hull (after input): 0.198
Test -- t3
QH7085 Qhull precision warning: repartition coplanar point p401 from f90444 as an outside point above twisted facet f90433 dist 0.00047 nearest vertices 3.2e-13
  CPU seconds to compute hull (after input): 0.177
  Maximum distance of point above facet: 2.3e-13 (13.8x)
  Maximum distance of vertex below facet: -1.8e-13 (11.1x)
Test -- t4
  CPU seconds to compute hull (after input): 0.208
Test -- t5
  CPU seconds to compute hull (after input): 0.243
Test -- t6
  CPU seconds to compute hull (after input): 0.211
  Maximum distance of point above facet: 2e-13 (12.0x)
Test -- t7
  CPU seconds to compute hull (after input): 0.205
Test -- t8
  CPU seconds to compute hull (after input): 0.194
Test -- t9
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r12609 and r12598.  Nearest v498 and v570 dist 0.51 (33702563635476.9x)
Test -- t10
  CPU seconds to compute hull (after input): 0.19
1591313886 Test 10 runs in 6 seconds (ave. 600 msec) -- rbox 1000 W0 C1,2e-13 D5 t1 | qhull Q14 Tv

Testing -- rbox 500 W0 C1,2e-13 D6 t1 | qhull Q14 Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-495099.log
Test -- t1
QH7085 Qhull precision warning: repartition coplanar point p75 from f228039 as an outside point above twisted facet f249986 dist 0.00033 nearest vertices 3.2e-13
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r79874 and r79879.  Nearest v324 and v535 dist 0.46 (19985215447239.0x)
Test -- t2
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r66254 and r66259.  Nearest v20 and v213 dist 0.49 (21557823068697.4x)
  Maximum distance of point above facet: 5.7e-13 (23.1x)
Test -- t3
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r22309 and r22303.  Nearest v26 and v290 dist 0.43 (18762058006914.9x)
Test -- t4
  CPU seconds to compute hull (after input): 1.283
  Maximum distance of point above facet: 2.5e-13 (10.1x)
  Maximum distance of vertex below facet: -3e-13 (12.2x)
Test -- t5
  CPU seconds to compute hull (after input): 1.132
  Maximum distance of vertex below facet: -2.5e-13 (10.0x)
Test -- t6
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r142084 and r143506.  Nearest v236 and v580 dist 0.28 (12167221004784.7x)
  Maximum distance of point above facet: 5.3e-13 (21.6x)
  Maximum distance of vertex below facet: -6.3e-13 (25.7x)
Test -- t7
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r93165 and r93538.  Nearest v296 and v410 dist 0.48 (21206162079995.6x)
  Maximum distance of vertex below facet: -2.9e-13 (11.7x)
Test -- t8
  CPU seconds to compute hull (after input): 1.33
  Maximum distance of point above facet: 2.7e-13 (11.1x)
  Maximum distance of vertex below facet: -3e-13 (12.1x)
Test -- t9
  CPU seconds to compute hull (after input): 1.201
  Maximum distance of point above facet: 2.9e-13 (11.7x)
  Maximum distance of vertex below facet: -2.8e-13 (11.4x)
Test -- t10
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r54174 and r72009.  Nearest v295 and v518 dist 0.37 (15990634214780.1x)
1591313899 Test 10 runs in 12 seconds (ave. 1200 msec) -- rbox 500 W0 C1,2e-13 D6 t1 | qhull Q14 Tv

====================
== Delaunay triangulation of point pairs (large upper facet)
== Difficult case due to large upper facet with nearly adjacent vertices
== A bounding box helps avoid this case, see TIME_DELAUNAY_PAIRS
====================

Testing -- rbox 100000 C1,2e-13 D2 t1 | qhull Q14 d Qbb >/d/bash/var/tmp/qtest-2020-06-04/qhull-430300.log
Test -- t1
  CPU seconds to compute hull (after input): 1.03
Test -- t2
  CPU seconds to compute hull (after input): 1.141
Test -- t3
  CPU seconds to compute hull (after input): 1.077
Test -- t4
  CPU seconds to compute hull (after input): 1.058
Test -- t5
  CPU seconds to compute hull (after input): 1.068
Test -- t6
  CPU seconds to compute hull (after input): 1.105
Test -- t7
  CPU seconds to compute hull (after input): 1.063
Test -- t8
  CPU seconds to compute hull (after input): 1.053
Test -- t9
  CPU seconds to compute hull (after input): 1.155
Test -- t10
  CPU seconds to compute hull (after input): 1.039
1591313919 Test 10 runs in 19 seconds (ave. 1900 msec) -- rbox 100000 C1,2e-13 D2 t1 | qhull Q14 d Qbb

Testing -- rbox 10000 C1,2e-13 D3 t1 | qhull Q14 d Qbb Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-99840.log
Test -- t1
  CPU seconds to compute hull (after input): 0.567
  Maximum distance of point above facet: 1.3e-13 (12.4x)
  Maximum distance of vertex below facet: -1.4e-13 (13.6x)
Test -- t2
  CPU seconds to compute hull (after input): 0.578
  Maximum distance of point above facet: 1.2e-13 (12.1x)
  Maximum distance of vertex below facet: -1.3e-13 (12.6x)
Test -- t3
  CPU seconds to compute hull (after input): 0.6
Test -- t4
  CPU seconds to compute hull (after input): 0.586
  Maximum distance of point above facet: 1.7e-13 (17.0x)
  Maximum distance of vertex below facet: -1.7e-13 (17.0x)
Test -- t5
  CPU seconds to compute hull (after input): 0.666
Test -- t6
  CPU seconds to compute hull (after input): 0.57
Test -- t7
  CPU seconds to compute hull (after input): 0.554
  Maximum distance of point above facet: 1.2e-13 (11.9x)
  Maximum distance of vertex below facet: -1e-13 (10.0x)
Test -- t8
  CPU seconds to compute hull (after input): 0.595
  Maximum distance of point above facet: 1.6e-13 (15.6x)
  Maximum distance of vertex below facet: -1.6e-13 (15.4x)
Test -- t9
  CPU seconds to compute hull (after input): 0.591
Test -- t10
  CPU seconds to compute hull (after input): 0.569
  Maximum distance of point above facet: 1.7e-13 (17.2x)
1591314060 Test 10 runs in 140 seconds (ave. 14000 msec) -- rbox 10000 C1,2e-13 D3 t1 | qhull Q14 d Qbb Tv

Testing -- rbox 500 C1,2e-13 D4 t1 | qhull Q14 d Qbb Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-786620.log
Test -- t1
  CPU seconds to compute hull (after input): 0.251
  Maximum distance of point above facet: 1.7e-13 (10.4x)
Test -- t2
  CPU seconds to compute hull (after input): 0.297
Test -- t3
QH6347 qhull precision error (qh_mergefacet): wide merge for facet f61980 into f61983 for mergetype 3 (concave).  maxdist  0 (0.0x) mindist -0.00029 (17708951316.3x) vertexdist 0.24  Allow with 'Q12' (allow-wide)
Test -- t4
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r37323 and r37309.  Nearest v145 and v655 dist 0.067 (4459578188183.3x)
Test -- t5
QH6348 qhull precision error (qh_mergefacet): wide merge for pinched facet f90244 into f90226 for mergetype 3 (concave).  maxdist 8.9e-16 (0x) mindist -0.00072 (43999621074.9x) vertexdist 2.3e-13  Allow with 'Q12' (allow-wide)
  Maximum distance of point above facet: 2.5e-13 (15.4x)
Test -- t6
  CPU seconds to compute hull (after input): 0.245
Test -- t7
QH7085 Qhull precision warning: repartition coplanar point p939 from f58978 as an outside point above twisted facet f53492 dist 0.00041 nearest vertices 2.1e-13
  CPU seconds to compute hull (after input): 0.248
Test -- t8
QH6391 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve opposite oriented ridges r49440 and r49431 in f83434 and f83454.  Nearest v702 and v749 dist 0.13 (8887619111449.9x)
Test -- t9
  CPU seconds to compute hull (after input): 0.269
Test -- t10
  CPU seconds to compute hull (after input): 0.287
  Maximum distance of point above facet: 2.2e-13 (13.3x)
  Maximum distance of vertex below facet: -2.2e-13 (13.3x)
1591314066 Test 10 runs in 5 seconds (ave. 500 msec) -- rbox 500 C1,2e-13 D4 t1 | qhull Q14 d Qbb Tv

Testing -- rbox 200 C1,2e-13 D5 t1 | qhull Q14 d Qbb Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-987482.log
Test -- t1
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f185034 and f185037 have the same vertices (skip 1, skip 1) and same horizon ridges to f141174 and f144760
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f185034 and f185037 have the same vertices (skip 2, skip 2) and same horizon ridges to f141174 and f144760
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f185034 and f185037 have the same vertices (skip 3, skip 3) and same horizon ridges to f141174 and f144760
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f185034 and f185037 have the same vertices (skip 4, skip 4) and same horizon ridges to f141174 and f144760
  CPU seconds to compute hull (after input): 0.593
  Maximum distance of point above facet: 2.9e-13 (11.9x)
  Maximum distance of vertex below facet: -3e-13 (12.1x)
Test -- t2
QH6348 qhull precision error (qh_mergefacet): wide merge for pinched facet f174047 into f174042 for mergetype 10 (degen).  maxdist  0 (0x) mindist -0.0016 (66839804109.7x) vertexdist 2.3e-13  Allow with 'Q12' (allow-wide)
  Maximum distance of point above facet: 3e-13 (12.4x)
Test -- t3
QH7085 Qhull precision warning: repartition coplanar point p347 from f112661 as an outside point above twisted facet f84991 dist 0.012 nearest vertices 2.4e-13
QH7085 Qhull precision warning: repartition coplanar point p262 from f146466 as an outside point above twisted facet f146340 dist 0.0036 nearest vertices 2.7e-13
  CPU seconds to compute hull (after input): 0.677
  Maximum distance of point above facet: 2.9e-13 (11.6x)
  Maximum distance of vertex below facet: -2.8e-13 (11.3x)
Test -- t4
  CPU seconds to compute hull (after input): 0.617
  Maximum distance of point above facet: 3.2e-13 (12.8x)
  Maximum distance of vertex below facet: -3.1e-13 (12.8x)
Test -- t5
  CPU seconds to compute hull (after input): 0.612
  Maximum distance of vertex below facet: -3.1e-13 (12.5x)
Test -- t6
QH7085 Qhull precision warning: repartition coplanar point p360 from f151288 as an outside point above twisted facet f150803 dist 0.0006 nearest vertices 2.3e-13
  CPU seconds to compute hull (after input): 0.648
  Maximum distance of point above facet: 2.7e-13 (11.1x)
  Maximum distance of vertex below facet: -2.7e-13 (11.0x)
Test -- t7
QH6271 qhull topology error (qh_check_dupridge): wide merge (137048246420.0x wider) due to dupridge between f120616 and f120712 (vertex dist 2.9e-13), merge dist 0.032, while processing p87
Test -- t8
QH7085 Qhull precision warning: repartition coplanar point p398 from f162825 as an outside point above twisted facet f161866 dist 0.0035 nearest vertices 2.4e-13
  CPU seconds to compute hull (after input): 0.655
  Maximum distance of point above facet: 3.3e-13 (13.2x)
  Maximum distance of vertex below facet: -3.1e-13 (12.7x)
Test -- t9
QH7085 Qhull precision warning: repartition coplanar point p20 from f184186 as an outside point above twisted facet f151412 dist 0.0025 nearest vertices 2.3e-13
QH7085 Qhull precision warning: repartition coplanar point p170 from f185019 as an outside point above twisted facet f185295 dist 0.0019 nearest vertices 2.6e-13
QH6348 qhull precision error (qh_mergefacet): wide merge for pinched facet f201965 into f164338 for mergetype 10 (degen).  maxdist  0 (0x) mindist -0.00068 (27672717659.2x) vertexdist 2.6e-13  Allow with 'Q12' (allow-wide)
Test -- t10
QH7085 Qhull precision warning: repartition coplanar point p299 from f93758 as an outside point above twisted facet f108187 dist 0.00051 nearest vertices 2.5e-13
QH7085 Qhull precision warning: repartition coplanar point p80 from f146206 as an outside point above twisted facet f146404 dist 0.0016 nearest vertices 2.1e-13
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f173687 and f173690 have the same vertices (skip 2, skip 2) and same horizon ridges to f148123 and f114638
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f173687 and f173690 have the same vertices (skip 4, skip 4) and same horizon ridges to f148123 and f114638
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f173687 and f173690 have the same vertices (skip 5, skip 5) and same horizon ridges to f148123 and f114638
QH6155 qhull topology error (qh_matchdupridge): missing qh_DUPLICATEridge at f173690 skip 4 for new f173687 skip 4 hash 2975 ismatch 1.  Set by qh_matchneighbor
1591314074 Test 10 runs in 8 seconds (ave. 800 msec) -- rbox 200 C1,2e-13 D5 t1 | qhull Q14 d Qbb Tv

Testing -- rbox 100 C1,2e-13 D6 t1 | qhull Q14 d Qbb Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-788775.log
Test -- t1
  CPU seconds to compute hull (after input): 1.063
  Maximum distance of vertex below facet: -3.7e-13 (10.6x)
Test -- t2
  CPU seconds to compute hull (after input): 0.989
Test -- t3
  CPU seconds to compute hull (after input): 1.078
Test -- t4
  CPU seconds to compute hull (after input): 1.032
  Maximum distance of point above facet: 3.6e-13 (10.3x)
  Maximum distance of vertex below facet: -3.6e-13 (10.4x)
Test -- t5
  CPU seconds to compute hull (after input): 1.035
  Maximum distance of point above facet: 3.9e-13 (11.2x)
  Maximum distance of vertex below facet: -3.5e-13 (10.0x)
Test -- t6
  CPU seconds to compute hull (after input): 1.183
  Maximum distance of point above facet: 3.6e-13 (10.2x)
  Maximum distance of vertex below facet: -3.6e-13 (10.2x)
Test -- t7
  CPU seconds to compute hull (after input): 1.035
  Maximum distance of point above facet: 3.6e-13 (10.3x)
  Maximum distance of vertex below facet: -3.9e-13 (11.2x)
Test -- t8
  CPU seconds to compute hull (after input): 1.092
  Maximum distance of point above facet: 3.9e-13 (11.2x)
Test -- t9
  CPU seconds to compute hull (after input): 1.053
  Maximum distance of vertex below facet: -3.5e-13 (10.1x)
Test -- t10
  CPU seconds to compute hull (after input): 1.133
1591314089 Test 10 runs in 14 seconds (ave. 1400 msec) -- rbox 100 C1,2e-13 D6 t1 | qhull Q14 d Qbb Tv

====================
== Delaunay triangulation of point quads (2e-13, large upper facet)
== Difficult case due to large upper facet with many nearly adjacent vertices
====================

Testing -- rbox 50000 C3,2e-13 D2 t1 | qhull Q14 d Qbb >/d/bash/var/tmp/qtest-2020-06-04/qhull-257453.log
Test -- t1
  CPU seconds to compute hull (after input): 0.79
Test -- t2
  CPU seconds to compute hull (after input): 0.816
Test -- t3
  CPU seconds to compute hull (after input): 0.751
Test -- t4
  CPU seconds to compute hull (after input): 0.794
Test -- t5
  CPU seconds to compute hull (after input): 0.827
Test -- t6
  CPU seconds to compute hull (after input): 0.816
Test -- t7
  CPU seconds to compute hull (after input): 0.756
Test -- t8
  CPU seconds to compute hull (after input): 0.788
Test -- t9
  CPU seconds to compute hull (after input): 0.807
Test -- t10
  CPU seconds to compute hull (after input): 0.798
1591314105 Test 10 runs in 15 seconds (ave. 1500 msec) -- rbox 50000 C3,2e-13 D2 t1 | qhull Q14 d Qbb

Testing -- rbox 10000 C3,2e-13 D3 t1 | qhull Q14 d Qbb >/d/bash/var/tmp/qtest-2020-06-04/qhull-793085.log
Test -- t1
QH7085 Qhull precision warning: repartition coplanar point p12320 from f382177 as an outside point above twisted facet f291472 dist 1.2e-05 nearest vertices 2.4e-13
  CPU seconds to compute hull (after input): 1.319
  Maximum distance of point above facet: 1.7e-13 (16.5x)
  Maximum distance of vertex below facet: -2.8e-13 (27.9x)
Test -- t2
  CPU seconds to compute hull (after input): 1.19
  Maximum distance of point above facet: 2e-13 (19.9x)
  Maximum distance of vertex below facet: -3e-13 (29.5x)
Test -- t3
QH6271 qhull topology error (qh_check_dupridge): wide merge (23901933399.7x wider) due to dupridge between f137488 and f137468 (vertex dist 1.5e-13), merge dist 0.0039, while processing p17270
  Maximum distance of point above facet: 1.6e-13 (16.3x)
Test -- t4
QH7085 Qhull precision warning: repartition coplanar point p29925 from f280725 as an outside point above twisted facet f256639 dist 0.00035 nearest vertices 3.3e-13
  CPU seconds to compute hull (after input): 1.327
Test -- t5
  CPU seconds to compute hull (after input): 1.315
  Maximum distance of vertex below facet: -2e-13 (20.2x)
Test -- t6
QH6271 qhull topology error (qh_check_dupridge): wide merge (11702792832.0x wider) due to dupridge between f387461 and f387449 (vertex dist 2.6e-13), merge dist 0.00061, while processing p22990
  Maximum distance of vertex below facet: -2.2e-13 (21.3x)
Test -- t7
QH7085 Qhull precision warning: repartition coplanar point p5375 from f42124 as an outside point above twisted facet f35929 dist 0.00017 nearest vertices 2.3e-13
QH7085 Qhull precision warning: repartition coplanar point p12414 from f118528 as an outside point above twisted facet f118402 dist 8.2e-05 nearest vertices 2.9e-13
QH7085 Qhull precision warning: repartition coplanar point p12412 from f131934 as an outside point above twisted facet f118402 dist 8.2e-05 nearest vertices 2.9e-13
QH6271 qhull topology error (qh_check_dupridge): wide merge (34223214094.6x wider) due to dupridge between f220362 and f220384 (vertex dist 2.1e-13), merge dist 0.0034, while processing p30020
Test -- t8
QH6271 qhull topology error (qh_check_dupridge): wide merge (7996982012.6x wider) due to dupridge between f145209 and f145190 (vertex dist 2.5e-13), merge dist 0.00036, while processing p33922
Test -- t9
QH6348 qhull precision error (qh_mergefacet): wide merge for pinched facet f281312 into f281315 for mergetype 10 (degen).  maxdist 0.00023 (22681376866x) mindist  0 (-0.0x) vertexdist 2.8e-13  Allow with 'Q12' (allow-wide)
  Maximum distance of point above facet: 1.5e-13 (14.5x)
  Maximum distance of vertex below facet: -1.9e-13 (18.6x)
Test -- t10
QH7085 Qhull precision warning: repartition coplanar point p13174 from f115708 as an outside point above twisted facet f75801 dist 6.2e-05 nearest vertices 1.8e-13
  CPU seconds to compute hull (after input): 1.255
  Maximum distance of point above facet: 1.2e-13 (11.9x)
  Maximum distance of vertex below facet: -1.5e-13 (15.0x)
1591314118 Test 10 runs in 13 seconds (ave. 1300 msec) -- rbox 10000 C3,2e-13 D3 t1 | qhull Q14 d Qbb

Testing -- rbox 200 C3,2e-13 D4 t1 | qhull Q14 d Qbb Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-728286.log
Test -- t1
QH7085 Qhull precision warning: repartition coplanar point p472 from f30497 as an outside point above twisted facet f28296 dist 0.0013 nearest vertices 2.9e-13
QH7085 Qhull precision warning: repartition coplanar point p474 from f15245 as an outside point above twisted facet f28296 dist 0.0013 nearest vertices 2.9e-13
QH7085 Qhull precision warning: repartition coplanar point p475 from f25323 as an outside point above twisted facet f28296 dist 0.0013 nearest vertices 2.9e-13
QH7085 Qhull precision warning: repartition coplanar point p360 from f32075 as an outside point above twisted facet f38829 dist 0.0016 nearest vertices 3.3e-13
QH7085 Qhull precision warning: repartition coplanar point p568 from f45312 as an outside point above twisted facet f61895 dist 0.00052 nearest vertices 3.2e-13
  CPU seconds to compute hull (after input): 0.233
  Maximum distance of vertex below facet: -2.2e-13 (13.2x)
Test -- t2
QH6271 qhull topology error (qh_check_dupridge): wide merge (428757713021.6x wider) due to dupridge between f60125 and f60186 (vertex dist 1.8e-13), merge dist 0.046, while processing p212
Test -- t3
QH7085 Qhull precision warning: repartition coplanar point p712 from f33823 as an outside point above twisted facet f33910 dist 0.0062 nearest vertices 3e-13
QH7085 Qhull precision warning: repartition coplanar point p489 from f63992 as an outside point above twisted facet f58682 dist 0.00083 nearest vertices 2.6e-13
QH7085 Qhull precision warning: repartition coplanar point p712 from f65054 as an outside point above twisted facet f65054 dist 0.0062 nearest vertices 3e-13
  CPU seconds to compute hull (after input): 0.224
  Maximum distance of point above facet: 2.7e-13 (16.3x)
  Maximum distance of vertex below facet: -2.6e-13 (16.0x)
Test -- t4
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f85331 and f85334 have the same vertices (skip 1, skip 1) and same horizon ridges to f56870 and f56807
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f85331 and f85334 have the same vertices (skip 3, skip 3) and same horizon ridges to f56870 and f56807
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f85331 and f85334 have the same vertices (skip 4, skip 4) and same horizon ridges to f56870 and f56807
  CPU seconds to compute hull (after input): 0.244
  Maximum distance of point above facet: 1.7e-13 (10.2x)
  Maximum distance of vertex below facet: -2.1e-13 (13.0x)
Test -- t5
  CPU seconds to compute hull (after input): 0.25
  Maximum distance of point above facet: 2.7e-13 (16.2x)
Test -- t6
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f69535 and f69536 have the same vertices (skip 2, skip 2) and same horizon ridges to f67282 and f55324
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f69535 and f69536 have the same vertices (skip 4, skip 4) and same horizon ridges to f67282 and f55324
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r33127 and r33205.  Nearest v112 and v298 dist 0.44 (29005168264526.7x)
Test -- t7
QH6271 qhull topology error (qh_check_dupridge): wide merge (127462857834.9x wider) due to dupridge between f68944 and f69003 (vertex dist 1.8e-13), merge dist 0.026, while processing p131
  Maximum distance of point above facet: 2e-13 (12.4x)
Test -- t8
QH7085 Qhull precision warning: repartition coplanar point p676 from f45805 as an outside point above twisted facet f45702 dist 0.0013 nearest vertices 2.1e-13
QH7085 Qhull precision warning: repartition coplanar point p676 from f57639 as an outside point above twisted facet f57674 dist 0.0013 nearest vertices 2.1e-13
  CPU seconds to compute hull (after input): 0.223
  Maximum distance of point above facet: 2.2e-13 (13.6x)
Test -- t9
QH6271 qhull topology error (qh_check_dupridge): wide merge (32039228101.5x wider) due to dupridge between f54848 and f54847 (vertex dist 4.5e-13), merge dist 0.003, while processing p245
Test -- t10
QH7085 Qhull precision warning: repartition coplanar point p195 from f41114 as an outside point above twisted facet f45686 dist 0.00052 nearest vertices 2.3e-13
QH7085 Qhull precision warning: repartition coplanar point p649 from f55532 as an outside point above twisted facet f51266 dist 0.00025 nearest vertices 3.1e-13
QH6271 qhull topology error (qh_check_dupridge): wide merge (126156001671.2x wider) due to dupridge between f84631 and f84632 (vertex dist 1.6e-13), merge dist 0.014, while processing p249
1591314123 Test 10 runs in 4 seconds (ave. 400 msec) -- rbox 200 C3,2e-13 D4 t1 | qhull Q14 d Qbb Tv

Testing -- rbox 100 C3,2e-13 D5 t1 | qhull Q14 d Qbb Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-395671.log
Test -- t1
QH7085 Qhull precision warning: repartition coplanar point p398 from f32500 as an outside point above twisted facet f31968 dist 0.00053 nearest vertices 3.1e-13
QH6271 qhull topology error (qh_check_dupridge): wide merge (85243973871.6x wider) due to dupridge between f37655 and f37777 (vertex dist 1.2e-13), merge dist 0.014, while processing p277
Test -- t2
QH6271 qhull topology error (qh_check_dupridge): wide merge (53863715239.4x wider) due to dupridge between f53646 and f53579 (vertex dist 1.8e-13), merge dist 0.011, while processing p271
Test -- t3
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f69313 and f69314 have the same vertices (skip 1, skip 1) and same horizon ridges to f48822 and f47087
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f69313 and f69314 have the same vertices (skip 2, skip 2) and same horizon ridges to f48822 and f47087
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f69313 and f69314 have the same vertices (skip 3, skip 3) and same horizon ridges to f48822 and f47087
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f69313 and f69314 have the same vertices (skip 4, skip 4) and same horizon ridges to f48822 and f47087
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f69313 and f69314 have the same vertices (skip 5, skip 5) and same horizon ridges to f48822 and f47087
QH6155 qhull topology error (qh_matchdupridge): missing qh_DUPLICATEridge at f69314 skip 4 for new f69313 skip 4 hash 299 ismatch 1.  Set by qh_matchneighbor
  Maximum distance of point above facet: 5.2e-13 (21.0x)
Test -- t4
QH6425 Qhull topology error (qh_partitioncoplanar): can not repartition coplanar point p81 from f24330 as outside point above f38196.  It previously failed to form a cone of facets, dist 0.021, nearest vertices 1.9e-13
  Maximum distance of point above facet: 4.5e-13 (18.2x)
Test -- t5
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f55397 and f55399 have the same vertices (skip 1, skip 1) and same horizon ridges to f45325 and f30999
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f55397 and f55399 have the same vertices (skip 2, skip 2) and same horizon ridges to f45325 and f30999
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f55397 and f55399 have the same vertices (skip 3, skip 3) and same horizon ridges to f45325 and f30999
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f55397 and f55399 have the same vertices (skip 5, skip 5) and same horizon ridges to f45325 and f30999
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f55691 and f55692 have the same vertices (skip 1, skip 1) and same horizon ridges to f31188 and f31188
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f55691 and f55692 have the same vertices (skip 2, skip 2) and same horizon ridges to f31188 and f31188
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f55691 and f55692 have the same vertices (skip 3, skip 3) and same horizon ridges to f31188 and f31188
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f55691 and f55692 have the same vertices (skip 4, skip 4) and same horizon ridges to f31188 and f31188
QH6155 qhull topology error (qh_matchdupridge): missing qh_DUPLICATEridge at f55692 skip 2 for new f55691 skip 2 hash 110 ismatch 1.  Set by qh_matchneighbor
  Maximum distance of point above facet: 3.7e-13 (14.9x)
Test -- t6
QH6425 Qhull topology error (qh_partitioncoplanar): can not repartition coplanar point p118 from f42823 as outside point above f59123.  It previously failed to form a cone of facets, dist 0.0012, nearest vertices 3e-13
  Maximum distance of point above facet: 4.3e-13 (17.6x)
Test -- t7
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f32570 and f32577 have the same vertices (skip 1, skip 1) and same horizon ridges to f30838 and f17693
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f32570 and f32577 have the same vertices (skip 2, skip 2) and same horizon ridges to f30838 and f17693
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f32570 and f32577 have the same vertices (skip 3, skip 3) and same horizon ridges to f30838 and f17693
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f32570 and f32577 have the same vertices (skip 5, skip 5) and same horizon ridges to f30838 and f17693
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f33395 and f33396 have the same vertices (skip 1, skip 1) and same horizon ridges to f30837 and f30837
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f33395 and f33396 have the same vertices (skip 2, skip 2) and same horizon ridges to f30837 and f30837
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f33395 and f33396 have the same vertices (skip 4, skip 4) and same horizon ridges to f30837 and f30837
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f33395 and f33396 have the same vertices (skip 5, skip 5) and same horizon ridges to f30837 and f30837
QH6155 qhull topology error (qh_matchdupridge): missing qh_DUPLICATEridge at f33396 skip 4 for new f33395 skip 4 hash 1814 ismatch 1.  Set by qh_matchneighbor
Test -- t8
QH7085 Qhull precision warning: repartition coplanar point p2 from f55464 as an outside point above twisted facet f55542 dist 0.012 nearest vertices 3.4e-13
QH7085 Qhull precision warning: repartition coplanar point p3 from f71850 as an outside point above twisted facet f55542 dist 0.012 nearest vertices 3.4e-13
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r62183 and r43372.  Nearest v132 and v169 dist 0.36 (15824738144899.3x)
Test -- t9
QH7085 Qhull precision warning: repartition coplanar point p104 from f37252 as an outside point above twisted facet f34161 dist 0.0053 nearest vertices 1.4e-13
QH7085 Qhull precision warning: repartition coplanar point p195 from f55708 as an outside point above twisted facet f55858 dist 0.0025 nearest vertices 2.8e-13
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f60441 and f60442 have the same vertices (skip 1, skip 1) and same horizon ridges to f52475 and f43643
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f60441 and f60442 have the same vertices (skip 4, skip 4) and same horizon ridges to f52475 and f43643
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f60441 and f60442 have the same vertices (skip 5, skip 5) and same horizon ridges to f52475 and f43643
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f75399 and f75401 have the same vertices (skip 2, skip 2) and same horizon ridges to f50203 and f53335
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f75399 and f75401 have the same vertices (skip 3, skip 3) and same horizon ridges to f50203 and f53335
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f75399 and f75401 have the same vertices (skip 4, skip 4) and same horizon ridges to f50203 and f53335
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f75399 and f75401 have the same vertices (skip 5, skip 5) and same horizon ridges to f50203 and f53335
QH6155 qhull topology error (qh_matchdupridge): missing qh_DUPLICATEridge at f75401 skip 5 for new f75399 skip 5 hash 2313 ismatch 1.  Set by qh_matchneighbor
  Maximum distance of point above facet: 3.9e-13 (15.7x)
Test -- t10
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f46690 and f46691 have the same vertices (skip 1, skip 1) and same horizon ridges to f41615 and f41615
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f46690 and f46691 have the same vertices (skip 2, skip 2) and same horizon ridges to f41615 and f41615
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f46690 and f46691 have the same vertices (skip 4, skip 4) and same horizon ridges to f41615 and f41615
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f53810 and f53813 have the same vertices (skip 1, skip 1) and same horizon ridges to f44991 and f49453
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f53810 and f53813 have the same vertices (skip 2, skip 2) and same horizon ridges to f44991 and f49453
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f53810 and f53813 have the same vertices (skip 3, skip 3) and same horizon ridges to f44991 and f49453
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f53810 and f53813 have the same vertices (skip 4, skip 4) and same horizon ridges to f44991 and f49453
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f53810 and f53813 have the same vertices (skip 5, skip 5) and same horizon ridges to f44991 and f49453
QH6155 qhull topology error (qh_matchdupridge): missing qh_DUPLICATEridge at f53813 skip 3 for new f53810 skip 3 hash 649 ismatch 1.  Set by qh_matchneighbor
  Maximum distance of point above facet: 3.2e-13 (12.8x)
1591314127 Test 10 runs in 3 seconds (ave. 300 msec) -- rbox 100 C3,2e-13 D5 t1 | qhull Q14 d Qbb Tv

Testing -- rbox 100 C3,2e-13 D6 t1 | qhull Q14 d Qbb Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-529579.log
Test -- t1
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f60622 and f60625 have the same vertices (skip 2, skip 2) and same horizon ridges to f45381 and f45383
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f60622 and f60625 have the same vertices (skip 3, skip 3) and same horizon ridges to f45381 and f45383
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f60622 and f60625 have the same vertices (skip 4, skip 4) and same horizon ridges to f45381 and f45383
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f60622 and f60625 have the same vertices (skip 5, skip 5) and same horizon ridges to f45381 and f45383
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r62945 and r62952.  Nearest v1 and v91 dist 0.58 (17756633105771.5x)
Test -- t2
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f30378 and f30379 have the same vertices (skip 3, skip 3) and same horizon ridges to f28250 and f28199
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f30378 and f30379 have the same vertices (skip 4, skip 4) and same horizon ridges to f28250 and f28199
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f30378 and f30379 have the same vertices (skip 5, skip 5) and same horizon ridges to f28250 and f28199
QH7085 Qhull precision warning: repartition coplanar point p77 from f459553 as an outside point above twisted facet f459471 dist 0.0045 nearest vertices 3.6e-13
QH6425 Qhull topology error (qh_partitioncoplanar): can not repartition coplanar point p269 from f428888 as outside point above f443167.  It previously failed to form a cone of facets, dist 0.0044, nearest vertices 3.4e-13
  Maximum distance of point above facet: 5.4e-13 (15.5x)
Test -- t3
QH7085 Qhull precision warning: repartition coplanar point p138 from f486368 as an outside point above twisted facet f456801 dist 0.018 nearest vertices 2.9e-13
QH6425 Qhull topology error (qh_partitioncoplanar): can not repartition coplanar point p138 from f456801 as outside point above f456801.  It previously failed to form a cone of facets, dist 0.018, nearest vertices 2.9e-13
  Maximum distance of point above facet: 6.7e-13 (19.1x)
Test -- t4
QH7085 Qhull precision warning: repartition coplanar point p160 from f486132 as an outside point above twisted facet f478047 dist 0.0078 nearest vertices 2.1e-13
QH7085 Qhull precision warning: repartition coplanar point p161 from f486262 as an outside point above twisted facet f478047 dist 0.0078 nearest vertices 2.1e-13
  CPU seconds to compute hull (after input): 2.417
  Maximum distance of point above facet: 5.4e-13 (15.3x)
  Maximum distance of vertex below facet: -6.4e-13 (18.4x)
Test -- t5
QH7085 Qhull precision warning: repartition coplanar point p71 from f128831 as an outside point above twisted facet f125804 dist 0.0028 nearest vertices 5e-13
QH7087 Qhull precision warning: in post-processing (qh_check_maxout) p196 for f444324 is 0.014 above twisted facet f474646 nearest vertices 2.9e-13
QH7087 Qhull precision warning: in post-processing (qh_check_maxout) p197 for f244291 is 0.014 above twisted facet f474646 nearest vertices 2.9e-13
QH7087 Qhull precision warning: in post-processing (qh_check_maxout) p198 for f173972 is 0.014 above twisted facet f474646 nearest vertices 2.9e-13
QH7087 Qhull precision warning: in post-processing (qh_check_maxout) p199 for f338726 is 0.014 above twisted facet f474646 nearest vertices 2.9e-13
QH6297 Qhull precision error (qh_check_maxout): large increase in qh.max_outside during post-processing dist 0.014 (27511359088.2x).  See warning QH0032/QH0033.  Allow with 'Q12' (allow-wide) and 'Pp'
  Maximum distance of point above facet: 0.014 (393049147618.8x)
  Maximum distance of vertex below facet: -4.2e-13 (12.1x)
Test -- t6
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f188213 and f188267 have the same vertices (skip 2, skip 2) and same horizon ridges to f147427 and f92655
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f188213 and f188267 have the same vertices (skip 4, skip 4) and same horizon ridges to f147427 and f92655
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f188213 and f188267 have the same vertices (skip 5, skip 5) and same horizon ridges to f147427 and f92655
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f188213 and f188267 have the same vertices (skip 6, skip 6) and same horizon ridges to f147427 and f92655
QH6271 qhull topology error (qh_check_dupridge): wide merge (4575757634.2x wider) due to dupridge between f379449 and f379436 (vertex dist 3.3e-13), merge dist 0.0028, while processing p275
  Maximum distance of point above facet: 6e-13 (17.3x)
Test -- t7
QH7085 Qhull precision warning: repartition coplanar point p392 from f47849 as an outside point above twisted facet f48668 dist 0.0048 nearest vertices 2.6e-13
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f131731 and f131732 have the same vertices (skip 1, skip 1) and same horizon ridges to f103529 and f90653
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f131731 and f131732 have the same vertices (skip 2, skip 2) and same horizon ridges to f103529 and f90653
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f131731 and f131732 have the same vertices (skip 4, skip 4) and same horizon ridges to f103529 and f90653
QH7085 Qhull precision warning: repartition coplanar point p56 from f145507 as an outside point above twisted facet f154853 dist 0.0022 nearest vertices 4.1e-13
QH6425 Qhull topology error (qh_partitioncoplanar): can not repartition coplanar point p112 from f208350 as outside point above f444562.  It previously failed to form a cone of facets, dist 0.022, nearest vertices 3.9e-13
  Maximum distance of point above facet: 5.5e-13 (15.6x)
Test -- t8
QH7085 Qhull precision warning: repartition coplanar point p289 from f154666 as an outside point above twisted facet f154831 dist 0.0001 nearest vertices 3.5e-13
QH7085 Qhull precision warning: repartition coplanar point p10 from f202799 as an outside point above twisted facet f198044 dist 8.8e-05 nearest vertices 3.6e-13
  CPU seconds to compute hull (after input): 2.755
  Maximum distance of point above facet: 5.9e-13 (16.7x)
  Maximum distance of vertex below facet: -5.9e-13 (16.9x)
Test -- t9
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f62222 and f62223 have the same vertices (skip 3, skip 3) and same horizon ridges to f46423 and f46695
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f62222 and f62223 have the same vertices (skip 4, skip 4) and same horizon ridges to f46423 and f46695
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f62222 and f62223 have the same vertices (skip 5, skip 5) and same horizon ridges to f46423 and f46695
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f62220 and f62224 have the same vertices (skip 2, skip 2) and same horizon ridges to f44626 and f58290
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f62220 and f62224 have the same vertices (skip 3, skip 3) and same horizon ridges to f44626 and f58290
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f62220 and f62224 have the same vertices (skip 5, skip 5) and same horizon ridges to f44626 and f58290
QH6155 qhull topology error (qh_matchdupridge): missing qh_DUPLICATEridge at f62223 skip 5 for new f62222 skip 5 hash 9681 ismatch 1.  Set by qh_matchneighbor
Test -- t10
QH7085 Qhull precision warning: repartition coplanar point p84 from f300897 as an outside point above twisted facet f298172 dist 0.0014 nearest vertices 2.3e-13
QH7085 Qhull precision warning: repartition coplanar point p87 from f271195 as an outside point above twisted facet f298172 dist 0.0014 nearest vertices 2.3e-13
QH7085 Qhull precision warning: repartition coplanar point p287 from f392815 as an outside point above twisted facet f373850 dist 0.0018 nearest vertices 2.2e-13
  CPU seconds to compute hull (after input): 2.57
  Maximum distance of point above facet: 5.1e-13 (14.7x)
  Maximum distance of vertex below facet: -4.7e-13 (13.4x)
1591314149 Test 10 runs in 21 seconds (ave. 2100 msec) -- rbox 100 C3,2e-13 D6 t1 | qhull Q14 d Qbb Tv

====================
== Delaunay triangulation of fuzzy circle with pairs (large, narrow disk)
== Highly degenerate due to narrow disk of two cospherical sets of point pairs
== Worse with Qbb since it stretches out the paraboloid, doubling _one-merge
====================

Testing -- rbox 10000 s W1e-13 C1,1e-13 D2 t1 | qhull Q14 d Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-799550.log
Test -- t1
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.15
  Maximum distance of point above facet: 8.9e-14 (16.0x)
Test -- t2
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH7085 Qhull precision warning: repartition coplanar point p8919 from f70212 as an outside point above twisted facet f70212 dist 3e-09 nearest vertices 3.9e-14
QH7085 Qhull precision warning: repartition coplanar point p455 from f59188 as an outside point above twisted facet f81155 dist 4.4e-12 nearest vertices 1.3e-13
  CPU seconds to compute hull (after input): 0.181
  Maximum distance of point above facet: 1.1e-13 (19.3x)
Test -- t3
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH7085 Qhull precision warning: repartition coplanar point p17910 from f11508 as an outside point above twisted facet f11509 dist 1.5e-09 nearest vertices 1.2e-13
QH7085 Qhull precision warning: repartition coplanar point p1289 from f50034 as an outside point above twisted facet f50033 dist 1.1e-10 nearest vertices 1.3e-13
QH7085 Qhull precision warning: repartition coplanar point p1146 from f51301 as an outside point above twisted facet f51297 dist 5.3e-09 nearest vertices 9.6e-14
  CPU seconds to compute hull (after input): 0.132
  Maximum distance of point above facet: 9e-14 (16.3x)
Test -- t4
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH7085 Qhull precision warning: repartition coplanar point p9630 from f2685 as an outside point above twisted facet f2685 dist 8.6e-08 nearest vertices 1.2e-13
QH7085 Qhull precision warning: repartition coplanar point p16714 from f32738 as an outside point above twisted facet f32736 dist 1.6e-08 nearest vertices 1.1e-13
QH7085 Qhull precision warning: repartition coplanar point p13115 from f87933 as an outside point above twisted facet f87933 dist 7.7e-11 nearest vertices 5.9e-14
  CPU seconds to compute hull (after input): 0.158
  Maximum distance of point above facet: 1.4e-13 (25.2x)
Test -- t5
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH7085 Qhull precision warning: repartition coplanar point p17035 from f27535 as an outside point above twisted facet f18091 dist 3.2e-08 nearest vertices 1.4e-13
  CPU seconds to compute hull (after input): 0.128
  Maximum distance of point above facet: 7.3e-14 (13.1x)
Test -- t6
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH7085 Qhull precision warning: repartition coplanar point p9250 from f30601 as an outside point above twisted facet f30601 dist 4.5e-10 nearest vertices 8.7e-14
  CPU seconds to compute hull (after input): 0.263
  Maximum distance of point above facet: 1e-13 (18.3x)
Test -- t7
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH7085 Qhull precision warning: repartition coplanar point p10212 from f52627 as an outside point above twisted facet f39538 dist 8e-08 nearest vertices 1.2e-13
QH7085 Qhull precision warning: repartition coplanar point p18974 from f62060 as an outside point above twisted facet f62059 dist 1.8e-10 nearest vertices 1.5e-13
  CPU seconds to compute hull (after input): 0.155
  Maximum distance of point above facet: 7.9e-14 (14.2x)
Test -- t8
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.135
Test -- t9
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH7085 Qhull precision warning: repartition coplanar point p9241 from f12854 as an outside point above twisted facet f19747 dist 2.1e-10 nearest vertices 5.3e-14
  CPU seconds to compute hull (after input): 0.285
  Maximum distance of point above facet: 1.1e-13 (20.2x)
Test -- t10
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH7085 Qhull precision warning: repartition coplanar point p1126 from f6831 as an outside point above twisted facet f6829 dist 6.6e-08 nearest vertices 6.8e-14
QH7085 Qhull precision warning: repartition coplanar point p5672 from f50284 as an outside point above twisted facet f50284 dist 2e-08 nearest vertices 1.3e-13
QH7085 Qhull precision warning: repartition coplanar point p16435 from f83558 as an outside point above twisted facet f83559 dist 4.2e-09 nearest vertices 1.2e-13
  CPU seconds to compute hull (after input): 0.134
1591314207 Test 10 runs in 56 seconds (ave. 5600 msec) -- rbox 10000 s W1e-13 C1,1e-13 D2 t1 | qhull Q14 d Tv

Testing -- rbox 5000 s W1e-13 C1,1e-13 D3 t1 | qhull Q14 d Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-207739.log
Test -- t1
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6417 qhull precision error (qh_merge_twisted): twisted facet f21567 does not contain pinched vertices.  Too wide to merge into neighbor.  mindist -2.7e-12 maxdist 1.2e-13 vertexdist 0.0099 maxpinched 1.8e-13 neighbor f50395 mindist -1.7e-13 maxdist  0
  Maximum distance of point above facet: 1.1e-13 (10.9x)
  Maximum distance of vertex below facet: -1.1e-13 (11.3x)
Test -- t2
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.869
Test -- t3
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH7085 Qhull precision warning: repartition coplanar point p8930 from f104123 as an outside point above twisted facet f103999 dist 0.00018 nearest vertices 1.2e-13
QH7085 Qhull precision warning: repartition coplanar point p892 from f113105 as an outside point above twisted facet f111527 dist 4.1e-05 nearest vertices 1.2e-13
QH7085 Qhull precision warning: repartition coplanar point p6690 from f123791 as an outside point above twisted facet f123795 dist 0.0006 nearest vertices 1.4e-13
QH7085 Qhull precision warning: repartition coplanar point p5468 from f142839 as an outside point above twisted facet f142837 dist 0.00098 nearest vertices 1.6e-13
QH7085 Qhull precision warning: repartition coplanar point p3405 from f142848 as an outside point above twisted facet f139682 dist 7.8e-05 nearest vertices 1e-13
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r165439 and r38425.  Nearest v830 and v1354 dist 0.074 (8134458896400.2x)
  Maximum distance of point above facet: 3.7e-13 (37.2x)
  Maximum distance of vertex below facet: -4.4e-13 (43.6x)
Test -- t4
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH7085 Qhull precision warning: repartition coplanar point p7666 from f61505 as an outside point above twisted facet f61504 dist 0.00016 nearest vertices 1.2e-13
QH7087 Qhull precision warning: in post-processing (qh_check_maxout) p606 for f82547 is 1.3e-05 above twisted facet f153062 nearest vertices 1.1e-13
QH7087 Qhull precision warning: in post-processing (qh_check_maxout) p956 for f158681 is 2.2e-05 above twisted facet f158676 nearest vertices 5.8e-14
QH7087 Qhull precision warning: in post-processing (qh_check_maxout) p957 for f138507 is 2.2e-05 above twisted facet f158676 nearest vertices 5.8e-14
QH7087 Qhull precision warning: in post-processing (qh_check_maxout) p1790 for f158676 is 4.3e-05 above twisted facet f158681 nearest vertices 9.4e-14
QH7087 Qhull precision warning: in post-processing (qh_check_maxout) p5202 for f105552 is 0.0004 above twisted facet f153062 nearest vertices 1.1e-13
QH7087 Qhull precision warning: in post-processing (qh_check_maxout) p5282 for f81536 is 0.00041 above twisted facet f153062 nearest vertices 1.1e-13
QH6297 Qhull precision error (qh_check_maxout): large increase in qh.max_outside during post-processing dist 0.00041 (6382723453.9x).  See warning QH0032/QH0033.  Allow with 'Q12' (allow-wide) and 'Pp'
  Maximum distance of point above facet: 0.00041 (40469546794.9x)
  Maximum distance of vertex below facet: -2.3e-13 (22.9x)
Test -- t5
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH7087 Qhull precision warning: in post-processing (qh_check_maxout) p8850 for f55068 is 8.7e-07 above twisted facet f95335 nearest vertices 1.1e-13
QH6297 Qhull precision error (qh_check_maxout): large increase in qh.max_outside during post-processing dist 8.7e-07 (1930350.1x).  See warning QH0032/QH0033.  Allow with 'Q12' (allow-wide) and 'Pp'
  Maximum distance of point above facet: 8.7e-07 (85973653.6x)
  Maximum distance of vertex below facet: -1e-13 (10.2x)
Test -- t6
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH7085 Qhull precision warning: repartition coplanar point p2321 from f163230 as an outside point above twisted facet f163220 dist 8.3e-05 nearest vertices 7.5e-14
QH7087 Qhull precision warning: in post-processing (qh_check_maxout) p826 for f88991 is 0.00033 above twisted facet f110829 nearest vertices 1.7e-13
QH6297 Qhull precision error (qh_check_maxout): large increase in qh.max_outside during post-processing dist 0.00033 (4218337700.8x).  See warning QH0032/QH0033.  Allow with 'Q12' (allow-wide) and 'Pp'
  Maximum distance of point above facet: 0.00033 (33146888209.5x)
  Maximum distance of vertex below facet: -2.3e-13 (22.6x)
Test -- t7
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH7087 Qhull precision warning: in post-processing (qh_check_maxout) p652 for f85664 is 3e-06 above twisted facet f144652 nearest vertices 7.8e-14
QH7087 Qhull precision warning: in post-processing (qh_check_maxout) p653 for f85664 is 3e-06 above twisted facet f144652 nearest vertices 7.8e-14
QH7087 Qhull precision warning: in post-processing (qh_check_maxout) p5236 for f144004 is 0.00013 above twisted facet f159710 nearest vertices 1.2e-13
QH6297 Qhull precision error (qh_check_maxout): large increase in qh.max_outside during post-processing dist 0.00013 (919993296.3x).  See warning QH0032/QH0033.  Allow with 'Q12' (allow-wide) and 'Pp'
  Maximum distance of point above facet: 0.00013 (13191992399.9x)
  Maximum distance of vertex below facet: -1.2e-13 (12.2x)
Test -- t8
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6347 qhull precision error (qh_mergefacet): wide merge for facet f33822 into f23677 for mergetype 6 (flip).  maxdist  0 (0.0x) mindist -2.4e-12 (236.3x) vertexdist 0.024  Allow with 'Q12' (allow-wide)
  Maximum distance of point above facet: 1.9e-13 (19.3x)
  Maximum distance of vertex below facet: -2.7e-13 (26.9x)
Test -- t9
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH7085 Qhull precision warning: repartition coplanar point p6766 from f44641 as an outside point above twisted facet f59686 dist 0.00017 nearest vertices 1.5e-13
QH7085 Qhull precision warning: repartition coplanar point p6333 from f79975 as an outside point above twisted facet f76440 dist 0.0019 nearest vertices 1.1e-13
QH6347 qhull precision error (qh_mergefacet): wide merge for facet f80579 into f75812 for mergetype 6 (flip).  maxdist  0 (0.0x) mindist -9.1e-12 (907.4x) vertexdist 0.029  Allow with 'Q12' (allow-wide)
  Maximum distance of point above facet: 3.9e-12 (383.9x)
  Maximum distance of vertex below facet: -1.8e-13 (17.6x)
Test -- t10
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH7087 Qhull precision warning: in post-processing (qh_check_maxout) p7294 for f134434 is 7.2e-05 above twisted facet f147686 nearest vertices 1.1e-13
QH6297 Qhull precision error (qh_check_maxout): large increase in qh.max_outside during post-processing dist 7.2e-05 (691353684.1x).  See warning QH0032/QH0033.  Allow with 'Q12' (allow-wide) and 'Pp'
  Maximum distance of point above facet: 7.2e-05 (7140208545.0x)
  Maximum distance of vertex below facet: -1.2e-13 (11.7x)
1591314219 Test 10 runs in 12 seconds (ave. 1200 msec) -- rbox 5000 s W1e-13 C1,1e-13 D3 t1 | qhull Q14 d Tv

Testing -- rbox 500 s W1e-13  C1,1e-13 D4 t1 | qhull Q14 d Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-609463.log
Test -- t1
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH7085 Qhull precision warning: repartition coplanar point p948 from f83190 as an outside point above twisted facet f86648 dist 0.00028 nearest vertices 1.1e-13
  CPU seconds to compute hull (after input): 0.274
Test -- t2
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.267
Test -- t3
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r38713 and r38597.  Nearest v77 and v303 dist 0.05 (3330384581182.4x)
  Maximum distance of point above facet: 6.2e-13 (38.1x)
  Maximum distance of vertex below facet: -5.5e-13 (33.5x)
Test -- t4
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r13989 and r13927.  Nearest v122 and v202 dist 0.14 (9422510226747.0x)
Test -- t5
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
  CPU seconds to compute hull (after input): 0.418
Test -- t6
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6271 qhull topology error (qh_check_dupridge): wide merge (231006179866.2x wider) due to dupridge between f34685 and f34686 (vertex dist 1.2e-13), merge dist 0.011, while processing p470
Test -- t7
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH7085 Qhull precision warning: repartition coplanar point p617 from f25266 as an outside point above twisted facet f65328 dist 0.00047 nearest vertices 1.3e-13
QH7085 Qhull precision warning: repartition coplanar point p605 from f71137 as an outside point above twisted facet f81400 dist 0.021 nearest vertices 1.2e-13
QH6425 Qhull topology error (qh_partitioncoplanar): can not repartition coplanar point p617 from f65328 as outside point above f65328.  It previously failed to form a cone of facets, dist 0.00047, nearest vertices 1.3e-13
  Maximum distance of vertex below facet: -6.1e-13 (37.6x)
Test -- t8
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6271 qhull topology error (qh_check_dupridge): wide merge (1712425744.3x wider) due to dupridge between f42222 and f42213 (vertex dist 1.3e-13), merge dist 0.00016, while processing p901
Test -- t9
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r97497 and r97495.  Nearest v951 and v958 dist 0.21 (14211983327451.1x)
Test -- t10
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6391 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve opposite oriented ridges r23942 and r23905 in f26657 and f26648.  Nearest v57 and v94 dist 0.12 (8422534220006.4x)
  Maximum distance of point above facet: 2e-13 (12.6x)
1591314224 Test 10 runs in 4 seconds (ave. 400 msec) -- rbox 500 s W1e-13  C1,1e-13 D4 t1 | qhull Q14 d Tv

Testing -- rbox 200 s W1e-13  C1,1e-13 D5 t1 | qhull Q14 d Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-276848.log
Test -- t1
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f65877 and f65878 have the same vertices (skip 3, skip 3) and same horizon ridges to f36436 and f26957
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f65877 and f65878 have the same vertices (skip 4, skip 4) and same horizon ridges to f36436 and f26957
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r91033 and r90813.  Nearest v102 and v243 dist 0.25 (11585979429831.3x)
  Maximum distance of point above facet: 2.5e-13 (10.7x)
  Maximum distance of vertex below facet: -8e-13 (34.2x)
Test -- t2
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r27312 and r21744.  Nearest v8 and v11 dist 0.12 (5599980284995.9x)
  Maximum distance of vertex below facet: -3.8e-13 (16.3x)
Test -- t3
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f76669 and f76670 have the same vertices (skip 1, skip 1) and same horizon ridges to f72263 and f72252
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f76669 and f76670 have the same vertices (skip 2, skip 2) and same horizon ridges to f72263 and f72252
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f76668 and f76672 have the same vertices (skip 1, skip 1) and same horizon ridges to f70929 and f70929
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f76668 and f76672 have the same vertices (skip 2, skip 2) and same horizon ridges to f70929 and f70929
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f76668 and f76672 have the same vertices (skip 5, skip 5) and same horizon ridges to f70929 and f70929
QH7081 qhull precision warning (qh_getpinchedmerges): pinched vertices v231 and v85 (dist 0.15, 1328212115756x) would produce a wide merge for f76671 and f76596.  Will merge dupridge instead
QH6361 qhull topological error (qh_mark_dupridges): multiple dupridges for f76668 and f76672, including reverse
Test -- t4
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r5823 and r3583.  Nearest v13 and v33 dist 0.26 (11735381901050.8x)
  Maximum distance of point above facet: 2.4e-13 (10.0x)
Test -- t5
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6347 qhull precision error (qh_mergefacet): wide merge for facet f86767 into f86766 for mergetype 7 (dupridge).  maxdist  0 (0.0x) mindist -2.9e-12 (128.8x) vertexdist 0.2  Allow with 'Q12' (allow-wide)
Test -- t6
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6391 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve opposite oriented ridges r21534 and r21559 in f18063 and f18083.  Nearest v58 and v85 dist 0.29 (13646960554035.8x)
Test -- t7
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f18317 and f18319 have the same vertices (skip 1, skip 1) and same horizon ridges to f14054 and f14054
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f18317 and f18319 have the same vertices (skip 2, skip 2) and same horizon ridges to f14054 and f14054
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f18317 and f18319 have the same vertices (skip 3, skip 3) and same horizon ridges to f14054 and f14054
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f18317 and f18319 have the same vertices (skip 5, skip 5) and same horizon ridges to f14054 and f14054
QH6155 qhull topology error (qh_matchdupridge): missing qh_DUPLICATEridge at f18319 skip 3 for new f18317 skip 3 hash 802 ismatch 1.  Set by qh_matchneighbor
  Maximum distance of point above facet: 9.8e-13 (40.9x)
Test -- t8
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f86520 and f86528 have the same vertices (skip 1, skip 1) and same horizon ridges to f84820 and f84820
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f86520 and f86528 have the same vertices (skip 2, skip 2) and same horizon ridges to f84820 and f84820
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f86520 and f86528 have the same vertices (skip 3, skip 3) and same horizon ridges to f84820 and f84820
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f86520 and f86528 have the same vertices (skip 4, skip 4) and same horizon ridges to f84820 and f84820
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f86520 and f86528 have the same vertices (skip 5, skip 5) and same horizon ridges to f84820 and f84820
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f86545 and f86546 have the same vertices (skip 1, skip 1) and same horizon ridges to f84922 and f84922
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f86545 and f86546 have the same vertices (skip 2, skip 2) and same horizon ridges to f84922 and f84922
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f86545 and f86546 have the same vertices (skip 3, skip 3) and same horizon ridges to f84922 and f84922
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f86545 and f86546 have the same vertices (skip 4, skip 4) and same horizon ridges to f84922 and f84922
QH6155 qhull topology error (qh_matchdupridge): missing qh_DUPLICATEridge at f86528 skip 3 for new f86520 skip 3 hash 2096 ismatch 1.  Set by qh_matchneighbor
  Maximum distance of point above facet: 6.3e-13 (26.7x)
  Maximum distance of vertex below facet: -3.4e-13 (14.4x)
Test -- t9
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r128601 and r111375.  Nearest v29 and v134 dist 0.17 (8013113085774.5x)
Test -- t10
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f85245 and f85343 have the same vertices (skip 1, skip 1) and same horizon ridges to f81217 and f81638
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f85245 and f85343 have the same vertices (skip 2, skip 2) and same horizon ridges to f81217 and f81638
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f85245 and f85343 have the same vertices (skip 3, skip 3) and same horizon ridges to f81217 and f81638
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f85245 and f85343 have the same vertices (skip 4, skip 4) and same horizon ridges to f81217 and f81638
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f85245 and f85343 have the same vertices (skip 5, skip 5) and same horizon ridges to f81217 and f81638
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f85275 and f85344 have the same vertices (skip 1, skip 1) and same horizon ridges to f81775 and f81455
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f85275 and f85344 have the same vertices (skip 4, skip 4) and same horizon ridges to f81775 and f81455
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f85275 and f85344 have the same vertices (skip 5, skip 5) and same horizon ridges to f81775 and f81455
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f86001 and f86099 have the same vertices (skip 1, skip 1) and same horizon ridges to f81217 and f81638
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f86001 and f86099 have the same vertices (skip 2, skip 2) and same horizon ridges to f81217 and f81638
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f86001 and f86099 have the same vertices (skip 3, skip 3) and same horizon ridges to f81217 and f81638
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f86001 and f86099 have the same vertices (skip 4, skip 4) and same horizon ridges to f81217 and f81638
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f86001 and f86099 have the same vertices (skip 5, skip 5) and same horizon ridges to f81217 and f81638
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f86031 and f86100 have the same vertices (skip 1, skip 1) and same horizon ridges to f81775 and f81455
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f86031 and f86100 have the same vertices (skip 4, skip 4) and same horizon ridges to f81775 and f81455
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f86031 and f86100 have the same vertices (skip 5, skip 5) and same horizon ridges to f81775 and f81455
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f86757 and f86855 have the same vertices (skip 1, skip 1) and same horizon ridges to f81217 and f81638
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f86757 and f86855 have the same vertices (skip 2, skip 2) and same horizon ridges to f81217 and f81638
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f86757 and f86855 have the same vertices (skip 3, skip 3) and same horizon ridges to f81217 and f81638
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f86757 and f86855 have the same vertices (skip 4, skip 4) and same horizon ridges to f81217 and f81638
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f86757 and f86855 have the same vertices (skip 5, skip 5) and same horizon ridges to f81217 and f81638
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f86787 and f86856 have the same vertices (skip 1, skip 1) and same horizon ridges to f81775 and f81455
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f86787 and f86856 have the same vertices (skip 4, skip 4) and same horizon ridges to f81775 and f81455
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f86787 and f86856 have the same vertices (skip 5, skip 5) and same horizon ridges to f81775 and f81455
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f87513 and f87611 have the same vertices (skip 1, skip 1) and same horizon ridges to f81217 and f81638
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f87513 and f87611 have the same vertices (skip 2, skip 2) and same horizon ridges to f81217 and f81638
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f87513 and f87611 have the same vertices (skip 3, skip 3) and same horizon ridges to f81217 and f81638
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f87513 and f87611 have the same vertices (skip 4, skip 4) and same horizon ridges to f81217 and f81638
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f87513 and f87611 have the same vertices (skip 5, skip 5) and same horizon ridges to f81217 and f81638
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f87543 and f87612 have the same vertices (skip 1, skip 1) and same horizon ridges to f81775 and f81455
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f87543 and f87612 have the same vertices (skip 4, skip 4) and same horizon ridges to f81775 and f81455
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f87543 and f87612 have the same vertices (skip 5, skip 5) and same horizon ridges to f81775 and f81455
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f88269 and f88367 have the same vertices (skip 1, skip 1) and same horizon ridges to f81217 and f81638
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f88269 and f88367 have the same vertices (skip 2, skip 2) and same horizon ridges to f81217 and f81638
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f88269 and f88367 have the same vertices (skip 3, skip 3) and same horizon ridges to f81217 and f81638
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f88269 and f88367 have the same vertices (skip 4, skip 4) and same horizon ridges to f81217 and f81638
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f88269 and f88367 have the same vertices (skip 5, skip 5) and same horizon ridges to f81217 and f81638
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f88299 and f88368 have the same vertices (skip 1, skip 1) and same horizon ridges to f81775 and f81455
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f88299 and f88368 have the same vertices (skip 4, skip 4) and same horizon ridges to f81775 and f81455
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f88299 and f88368 have the same vertices (skip 5, skip 5) and same horizon ridges to f81775 and f81455
QH7081 qhull precision warning (qh_getpinchedmerges): pinched vertices v256 and v92 (dist 0.051, 102248841159x) would produce a wide merge for f88419 and f88416.  Will merge dupridge instead
QH6361 qhull topological error (qh_mark_dupridges): multiple dupridges for f88269 and f88367, including reverse
  Maximum distance of vertex below facet: -5e-13 (22.0x)
1591314228 Test 10 runs in 3 seconds (ave. 300 msec) -- rbox 200 s W1e-13  C1,1e-13 D5 t1 | qhull Q14 d Tv

Testing -- rbox 100 s W1e-13  C1,1e-13 D6 t1 | qhull Q14 d Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-944233.log
Test -- t1
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r20591 and r20602.  Nearest v9 and v14 dist 0.16 (5355849098491.0x)
Test -- t2
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f36893 and f36910 have the same vertices (skip 1, skip 1) and same horizon ridges to f13135 and f13135
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f36893 and f36910 have the same vertices (skip 2, skip 2) and same horizon ridges to f13135 and f13135
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f36893 and f36910 have the same vertices (skip 3, skip 3) and same horizon ridges to f13135 and f13135
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f36893 and f36910 have the same vertices (skip 4, skip 4) and same horizon ridges to f13135 and f13135
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f36893 and f36910 have the same vertices (skip 6, skip 6) and same horizon ridges to f13135 and f13135
QH6155 qhull topology error (qh_matchdupridge): missing qh_DUPLICATEridge at f36910 skip 3 for new f36893 skip 3 hash 649 ismatch 1.  Set by qh_matchneighbor
Test -- t3
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f42897 and f42914 have the same vertices (skip 1, skip 1) and same horizon ridges to f25665 and f25167
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f42897 and f42914 have the same vertices (skip 3, skip 3) and same horizon ridges to f25665 and f25167
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f42897 and f42914 have the same vertices (skip 4, skip 4) and same horizon ridges to f25665 and f25167
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f42897 and f42914 have the same vertices (skip 6, skip 6) and same horizon ridges to f25665 and f25167
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f45327 and f45330 have the same vertices (skip 1, skip 1) and same horizon ridges to f7820 and f7820
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f45327 and f45330 have the same vertices (skip 3, skip 3) and same horizon ridges to f7820 and f7820
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f45327 and f45330 have the same vertices (skip 4, skip 4) and same horizon ridges to f7820 and f7820
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r25070 and r53364.  Nearest v18 and v53 dist 0.22 (7683622046685.1x)
Test -- t4
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f51508 and f51510 have the same vertices (skip 1, skip 1) and same horizon ridges to f30507 and f39669
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f51508 and f51510 have the same vertices (skip 2, skip 2) and same horizon ridges to f30507 and f39669
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f51508 and f51510 have the same vertices (skip 5, skip 5) and same horizon ridges to f30507 and f39669
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f51508 and f51510 have the same vertices (skip 6, skip 6) and same horizon ridges to f30507 and f39669
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f51507 and f51511 have the same vertices (skip 1, skip 1) and same horizon ridges to f19171 and f30753
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f51507 and f51511 have the same vertices (skip 2, skip 2) and same horizon ridges to f19171 and f30753
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f51507 and f51511 have the same vertices (skip 3, skip 3) and same horizon ridges to f19171 and f30753
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f51507 and f51511 have the same vertices (skip 5, skip 5) and same horizon ridges to f19171 and f30753
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f51507 and f51511 have the same vertices (skip 6, skip 6) and same horizon ridges to f19171 and f30753
QH6155 qhull topology error (qh_matchdupridge): missing qh_DUPLICATEridge at f51511 skip 5 for new f51507 skip 5 hash 459 ismatch 1.  Set by qh_matchneighbor
Test -- t5
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r33252 and r36487.  Nearest v21 and v45 dist 0.37 (12223161979313.1x)
  Maximum distance of vertex below facet: -9.5e-13 (29.7x)
Test -- t6
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r20356 and r21043.  Nearest v17 and v41 dist 0.35 (11546961641179.1x)
  Maximum distance of vertex below facet: -4.5e-13 (14.0x)
Test -- t7
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f22426 and f22461 have the same vertices (skip 2, skip 2) and same horizon ridges to f13937 and f13937
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f22426 and f22461 have the same vertices (skip 4, skip 4) and same horizon ridges to f13937 and f13937
QH7081 qhull precision warning (qh_getpinchedmerges): pinched vertices v59 and v24 (dist 0.12, 1174239239079x) would produce a wide merge for f22426 and f22461.  Will merge dupridge instead
QH6361 qhull topological error (qh_mark_dupridges): multiple dupridges for f22426 and f22461, including reverse
Test -- t8
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r20549 and r12171.  Nearest v11 and v37 dist 0.2 (6991485173088.3x)
Test -- t9
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f9958 and f9968 have the same vertices (skip 1, skip 1) and same horizon ridges to f6116 and f3475
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f9958 and f9968 have the same vertices (skip 2, skip 2) and same horizon ridges to f6116 and f3475
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f9958 and f9968 have the same vertices (skip 3, skip 3) and same horizon ridges to f6116 and f3475
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f9958 and f9968 have the same vertices (skip 5, skip 5) and same horizon ridges to f6116 and f3475
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f9958 and f9968 have the same vertices (skip 6, skip 6) and same horizon ridges to f6116 and f3475
QH6361 qhull topological error (qh_mark_dupridges): multiple dupridges for f9958 and f9968, including reverse
  Maximum distance of vertex below facet: -5.4e-13 (18.5x)
Test -- t10
QH7089 qhull precision warning: The initial hull is narrow.  Is the input lower
QH6391 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve opposite oriented ridges r553 and r464 in f569 and f42.  Nearest v2 and v17 dist 0.5 (17642408039144.3x)
1591314232 Test 10 runs in 3 seconds (ave. 300 msec) -- rbox 100 s W1e-13  C1,1e-13 D6 t1 | qhull Q14 d Tv

====================
== Voronoi diagram of rotated mesh with wide, 1e-8 pairs
== All fail at C1,1e-12
====================

Testing -- rbox 10000 M3,4 C1,1e-8 D2 t1 | qhull QR3 Q14 v Qbb Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-544664.log
Test -- t1
  CPU seconds to compute hull (after input): 0.138
Test -- t2
  CPU seconds to compute hull (after input): 0.133
Test -- t3
  CPU seconds to compute hull (after input): 0.128
Test -- t4
  CPU seconds to compute hull (after input): 0.13
Test -- t5
  CPU seconds to compute hull (after input): 0.128
Test -- t6
  CPU seconds to compute hull (after input): 0.128
Test -- t7
  CPU seconds to compute hull (after input): 0.129
Test -- t8
  CPU seconds to compute hull (after input): 0.149
Test -- t9
  CPU seconds to compute hull (after input): 0.138
Test -- t10
  CPU seconds to compute hull (after input): 0.133
1591314301 Test 10 runs in 68 seconds (ave. 6800 msec) -- rbox 10000 M3,4 C1,1e-8 D2 t1 | qhull QR3 Q14 v Qbb Tv

Testing -- rbox 2000 M3,4,5 C1,1e-8 D3 t1 | qhull QR3 Q14 v Qbb Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-354577.log
Test -- t1
QH7081 qhull precision warning (qh_getpinchedmerges): pinched vertices v1581 and v128 (dist 1.5e-08, 5900x) would produce a wide merge for f67521 and f67517.  Will merge dupridge instead
QH6271 qhull topology error (qh_check_dupridge): wide merge (45056588.6x wider) due to dupridge between f67521 and f67517 (vertex dist 1.5e-08), merge dist 0.00012, while processing p548
Test -- t2
  CPU seconds to compute hull (after input): 0.111
Test -- t3
  CPU seconds to compute hull (after input): 0.109
Test -- t4
QH7081 qhull precision warning (qh_getpinchedmerges): pinched vertices v942 and v599 (dist 1e-08, 4123x) would produce a wide merge for f60963 and f60977.  Will merge dupridge instead
QH6271 qhull topology error (qh_check_dupridge): wide merge (95642702.5x wider) due to dupridge between f60963 and f60977 (vertex dist 1e-08), merge dist 0.00024, while processing p1401
Test -- t5
QH7081 qhull precision warning (qh_getpinchedmerges): pinched vertices v658 and v408 (dist 1.3e-08, 5100x) would produce a wide merge for f17839 and f17857.  Will merge dupridge instead
QH6271 qhull topology error (qh_check_dupridge): wide merge (168477336.0x wider) due to dupridge between f17839 and f17857 (vertex dist 1.3e-08), merge dist 0.00042, while processing p643
Test -- t6
QH6271 qhull topology error (qh_check_dupridge): wide merge (145857611.2x wider) due to dupridge between f71951 and f71942 (vertex dist 1.5e-08), merge dist 0.00036, while processing p2410
Test -- t7
  CPU seconds to compute hull (after input): 0.111
Test -- t8
QH7081 qhull precision warning (qh_getpinchedmerges): pinched vertices v2061 and v542 (dist 1.1e-08, 4571x) would produce a wide merge for f70338 and f70340.  Will merge dupridge instead
QH6271 qhull topology error (qh_check_dupridge): wide merge (123.4x wider) due to dupridge between f70338 and f70340 (vertex dist 1.1e-08), merge dist 3e-10, while processing p2537
Test -- t9
QH7081 qhull precision warning (qh_getpinchedmerges): pinched vertices v2465 and v1930 (dist 1.7e-08, 7048x) would produce a wide merge for f80589 and f80576.  Will merge dupridge instead
QH6271 qhull topology error (qh_check_dupridge): wide merge (106850984.5x wider) due to dupridge between f80589 and f80576 (vertex dist 1.7e-08), merge dist 0.00026, while processing p535
Test -- t10
  CPU seconds to compute hull (after input): 0.106
1591314308 Test 10 runs in 7 seconds (ave. 700 msec) -- rbox 2000 M3,4,5 C1,1e-8 D3 t1 | qhull QR3 Q14 v Qbb Tv

Testing -- rbox 600 M3,4,5 C1,1e-8 D4 t1 | qhull QR3 Q14 v Qbb Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-622393.log
Test -- t1
  CPU seconds to compute hull (after input): 0.221
Test -- t2
  CPU seconds to compute hull (after input): 0.257
Test -- t3
  CPU seconds to compute hull (after input): 0.23
Test -- t4
  CPU seconds to compute hull (after input): 0.235
Test -- t5
  CPU seconds to compute hull (after input): 0.247
Test -- t6
  CPU seconds to compute hull (after input): 0.223
Test -- t7
QH7081 qhull precision warning (qh_getpinchedmerges): pinched vertices v529 and v929 (dist 8.7e-09, 7425x) would produce a wide merge for f112419 and f112421.  Will merge dupridge instead
QH6271 qhull topology error (qh_check_dupridge): wide merge (172594538.9x wider) due to dupridge between f112419 and f112421 (vertex dist 1.3e-08), merge dist 0.0002, while processing p380
Test -- t8
  CPU seconds to compute hull (after input): 0.223
Test -- t9
  CPU seconds to compute hull (after input): 0.22
Test -- t10
  CPU seconds to compute hull (after input): 0.221
1591314317 Test 10 runs in 8 seconds (ave. 800 msec) -- rbox 600 M3,4,5 C1,1e-8 D4 t1 | qhull QR3 Q14 v Qbb Tv

Testing -- rbox 300 M3,4,5 C1,1e-8 D5 t1 | qhull QR3 Q14 v Qbb Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-890209.log
Test -- t1
  CPU seconds to compute hull (after input): 0.803
Test -- t2
  CPU seconds to compute hull (after input): 0.804
Test -- t3
  CPU seconds to compute hull (after input): 0.833
Test -- t4
  CPU seconds to compute hull (after input): 0.848
Test -- t5
  CPU seconds to compute hull (after input): 0.785
Test -- t6
  CPU seconds to compute hull (after input): 0.762
Test -- t7
  CPU seconds to compute hull (after input): 0.878
Test -- t8
  CPU seconds to compute hull (after input): 0.803
Test -- t9
  CPU seconds to compute hull (after input): 0.819
Test -- t10
  CPU seconds to compute hull (after input): 0.808
1591314334 Test 10 runs in 16 seconds (ave. 1600 msec) -- rbox 300 M3,4,5 C1,1e-8 D5 t1 | qhull QR3 Q14 v Qbb Tv
skip D6, millions of vertices

============================
== Delaunay triangulation of nearly cospherical point pairs with Qbb drum
== Qbb makes this the most difficult distribution for Qhull, only 100 points
============================

Testing -- rbox 1000 s C1,1e-13 D3 t1 | qhull Q14 d Qbb Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-492795.log
Test -- t1
  CPU seconds to compute hull (after input): 0.043
Test -- t2
  CPU seconds to compute hull (after input): 0.042
Test -- t3
  CPU seconds to compute hull (after input): 0.042
Test -- t4
  CPU seconds to compute hull (after input): 0.042
Test -- t5
  CPU seconds to compute hull (after input): 0.043
Test -- t6
  CPU seconds to compute hull (after input): 0.043
Test -- t7
  CPU seconds to compute hull (after input): 0.043
Test -- t8
  CPU seconds to compute hull (after input): 0.046
Test -- t9
  CPU seconds to compute hull (after input): 0.043
Test -- t10
  CPU seconds to compute hull (after input): 0.042
1591314339 Test 10 runs in 4 seconds (ave. 400 msec) -- rbox 1000 s C1,1e-13 D3 t1 | qhull Q14 d Qbb Tv

Testing -- rbox 100 s C1,1e-13 D4 t1 | qhull Q14 d Qbb Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-626703.log
Test -- t1
  CPU seconds to compute hull (after input): 0.02
Test -- t2
QH6271 qhull topology error (qh_check_dupridge): wide merge (499726909788.7x wider) due to dupridge between f15279 and f15281 (vertex dist 0.0026), merge dist 0.0088, while processing p150
Test -- t3
QH6271 qhull topology error (qh_check_dupridge): wide merge (707750430102.1x wider) due to dupridge between f11994 and f12093 (vertex dist 0.1), merge dist 0.012, while processing p104
Test -- t4
  CPU seconds to compute hull (after input): 0.021
Test -- t5
QH6271 qhull topology error (qh_check_dupridge): wide merge (119659788166.1x wider) due to dupridge between f7842 and f7823 (vertex dist 0.0016), merge dist 0.0021, while processing p55
Test -- t6
  CPU seconds to compute hull (after input): 0.02
Test -- t7
QH6271 qhull topology error (qh_check_dupridge): wide merge (826947278897.3x wider) due to dupridge between f10941 and f10938 (vertex dist 0.12), merge dist 0.014, while processing p174
Test -- t8
QH6271 qhull topology error (qh_check_dupridge): wide merge (332360605318.1x wider) due to dupridge between f12931 and f12932 (vertex dist 0.05), merge dist 0.0058, while processing p72
Test -- t9
  CPU seconds to compute hull (after input): 0.02
Test -- t10
QH6271 qhull topology error (qh_check_dupridge): wide merge (279982910429.7x wider) due to dupridge between f13107 and f13053 (vertex dist 0.0087), merge dist 0.0049, while processing p148
1591314342 Test 10 runs in 2 seconds (ave. 200 msec) -- rbox 100 s C1,1e-13 D4 t1 | qhull Q14 d Qbb Tv

Testing -- rbox 50 s C1,1e-13 D5 t1 | qhull Q14 d Qbb Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-227134.log
Test -- t1
QH6271 qhull topology error (qh_check_dupridge): wide merge (4995107542900.0x wider) due to dupridge between f16194 and f16417 (vertex dist 0.14), merge dist 0.12, while processing p13
Test -- t2
  CPU seconds to compute hull (after input): 0.045
Test -- t3
  CPU seconds to compute hull (after input): 0.043
Test -- t4
  CPU seconds to compute hull (after input): 0.042
Test -- t5
QH6271 qhull topology error (qh_check_dupridge): wide merge (145603403574.2x wider) due to dupridge between f18407 and f18342 (vertex dist 0.1), merge dist 0.0034, while processing p84
Test -- t6
  CPU seconds to compute hull (after input): 0.044
Test -- t7
QH6271 qhull topology error (qh_check_dupridge): wide merge (45196191923.8x wider) due to dupridge between f18796 and f18794 (vertex dist 0.023), merge dist 0.00098, while processing p69
Test -- t8
  CPU seconds to compute hull (after input): 0.043
Test -- t9
QH6271 qhull topology error (qh_check_dupridge): wide merge (423011392553.9x wider) due to dupridge between f23440 and f23439 (vertex dist 0.0016), merge dist 0.0097, while processing p38
Test -- t10
QH7081 qhull precision warning (qh_getpinchedmerges): pinched vertices v34 and v17 (dist 0.0067, 299162469040x) would produce a wide merge for f14316 and f14545.  Will merge dupridge instead
QH6271 qhull topology error (qh_check_dupridge): wide merge (878926583303.0x wider) due to dupridge between f14316 and f14545 (vertex dist 0.017), merge dist 0.02, while processing p66
1591314345 Test 10 runs in 2 seconds (ave. 200 msec) -- rbox 50 s C1,1e-13 D5 t1 | qhull Q14 d Qbb Tv

Testing -- rbox 50 s C1,1e-13 D6 t1 | qhull Q14 d Qbb Tv >/d/bash/var/tmp/qtest-2020-06-04/qhull-827565.log
Test -- t1
QH6271 qhull topology error (qh_check_dupridge): wide merge (5897312052479.2x wider) due to dupridge between f18531 and f18530 (vertex dist 0.092), merge dist 0.19, while processing p77
Test -- t2
QH6271 qhull topology error (qh_check_dupridge): wide merge (1724107680480.5x wider) due to dupridge between f25295 and f25296 (vertex dist 0.00061), merge dist 0.054, while processing p3
Test -- t3
QH6271 qhull topology error (qh_check_dupridge): wide merge (798302749670.2x wider) due to dupridge between f18579 and f18574 (vertex dist 0.084), merge dist 0.024, while processing p83
Test -- t4
QH7081 qhull precision warning (qh_getpinchedmerges): pinched vertices v33 and v2 (dist 0.016, 535923660887x) would produce a wide merge for f13575 and f13490.  Will merge dupridge instead
QH6271 qhull topology error (qh_check_dupridge): wide merge (527892127468.9x wider) due to dupridge between f13575 and f13490 (vertex dist 0.016), merge dist 0.016, while processing p23
Test -- t5
QH6271 qhull topology error (qh_check_dupridge): wide merge (50044710155.4x wider) due to dupridge between f13023 and f13391 (vertex dist 0.2), merge dist 0.0017, while processing p75
Test -- t6
QH7081 qhull precision warning (qh_getpinchedmerges): pinched vertices v57 and v22 (dist 0.0063, 221587513534x) would produce a wide merge for f39570 and f39365.  Will merge dupridge instead
QH6271 qhull topology error (qh_check_dupridge): wide merge (2548029701901.9x wider) due to dupridge between f39570 and f39365 (vertex dist 0.0063), merge dist 0.072, while processing p52
Test -- t7
QH7081 qhull precision warning (qh_getpinchedmerges): pinched vertices v25 and v57 (dist 0.0017, 55693747840x) would produce a wide merge for f30840 and f30837.  Will merge dupridge instead
QH6271 qhull topology error (qh_check_dupridge): wide merge (1650435777757.3x wider) due to dupridge between f30625 and f30623 (vertex dist 0.012), merge dist 0.051, while processing p52
Test -- t8
QH7081 qhull precision warning (qh_getpinchedmerges): pinched vertices v49 and v29 (dist 0.00012, 4740313861x) would produce a wide merge for f46587 and f46678.  Will merge dupridge instead
QH6271 qhull topology error (qh_check_dupridge): wide merge (139144921895.4x wider) due to dupridge between f46374 and f46372 (vertex dist 0.025), merge dist 0.0036, while processing p50
Test -- t9
QH6271 qhull topology error (qh_check_dupridge): wide merge (556932183829.0x wider) due to dupridge between f13608 and f13610 (vertex dist 0.022), merge dist 0.017, while processing p50
Test -- t10
QH7081 qhull precision warning (qh_getpinchedmerges): pinched vertices v56 and v42 (dist 0.00098, 34927769758x) would produce a wide merge for f30280 and f30270.  Will merge dupridge instead
QH6271 qhull topology error (qh_check_dupridge): wide merge (216561738457.3x wider) due to dupridge between f30280 and f30270 (vertex dist 0.00098), merge dist 0.0061, while processing p92
1591314348 Test 10 runs in 2 seconds (ave. 200 msec) -- rbox 50 s C1,1e-13 D6 t1 | qhull Q14 d Qbb Tv

============================
== Time for pinched Delaunay triangulation of random point pairs (Q14) with bounding box
============================

Testing -- rbox 50000 C1,2e-13 c G2.0 D2 t1 | qhull Q14 d Qbb >/d/bash/var/tmp/qtest-2020-06-04/qhull-427996.log
Test -- t1
  CPU seconds to compute hull (after input): 0.499
Test -- t2
  CPU seconds to compute hull (after input): 0.475
Test -- t3
  CPU seconds to compute hull (after input): 0.478
Test -- t4
  CPU seconds to compute hull (after input): 0.478
Test -- t5
  CPU seconds to compute hull (after input): 0.449
Test -- t6
  CPU seconds to compute hull (after input): 0.496
Test -- t7
  CPU seconds to compute hull (after input): 0.503
Test -- t8
  CPU seconds to compute hull (after input): 0.494
Test -- t9
  CPU seconds to compute hull (after input): 0.479
Test -- t10
  CPU seconds to compute hull (after input): 0.48
1591314359 Test 10 runs in 10 seconds (ave. 1000 msec) -- rbox 50000 C1,2e-13 c G2.0 D2 t1 | qhull Q14 d Qbb

Testing -- rbox 10000 C1,2e-13 c G2.0 D3 t1 | qhull Q14 d Qbb >/d/bash/var/tmp/qtest-2020-06-04/qhull-296243.log
Test -- t1
  CPU seconds to compute hull (after input): 0.392
Test -- t2
  CPU seconds to compute hull (after input): 0.386
Test -- t3
  CPU seconds to compute hull (after input): 0.411
Test -- t4
  CPU seconds to compute hull (after input): 0.399
Test -- t5
  CPU seconds to compute hull (after input): 0.407
Test -- t6
  CPU seconds to compute hull (after input): 0.387
Test -- t7
  CPU seconds to compute hull (after input): 0.386
Test -- t8
  CPU seconds to compute hull (after input): 0.408
Test -- t9
  CPU seconds to compute hull (after input): 0.404
Test -- t10
  CPU seconds to compute hull (after input): 0.367
1591314366 Test 10 runs in 6 seconds (ave. 600 msec) -- rbox 10000 C1,2e-13 c G2.0 D3 t1 | qhull Q14 d Qbb

Testing -- rbox 3000 C1,2e-13 c G2.0 D4 t1 | qhull Q14 d Qbb >/d/bash/var/tmp/qtest-2020-06-04/qhull-564059.log
Test -- t1
QH6347 qhull precision error (qh_mergefacet): wide merge for facet f190685 into f190684 for mergetype 3 (concave).  maxdist  0 (0.0x) mindist -9.2e-05 (1409066448.7x) vertexdist 0.11  Allow with 'Q12' (allow-wide)
Test -- t2
QH7085 Qhull precision warning: repartition coplanar point p4824 from f261866 as an outside point above twisted facet f261713 dist 0.00066 nearest vertices 2e-13
  CPU seconds to compute hull (after input): 0.976
Test -- t3
QH7085 Qhull precision warning: repartition coplanar point p5663 from f370475 as an outside point above twisted facet f370562 dist 0.0043 nearest vertices 3e-13
QH7085 Qhull precision warning: repartition coplanar point p2873 from f370475 as an outside point above twisted facet f370562 dist 0.00034 nearest vertices 3e-13
QH7085 Qhull precision warning: repartition coplanar point p2311 from f370475 as an outside point above twisted facet f370562 dist 0.015 nearest vertices 3e-13
  CPU seconds to compute hull (after input): 0.956
Test -- t4
  CPU seconds to compute hull (after input): 0.941
Test -- t5
QH7085 Qhull precision warning: repartition coplanar point p1727 from f29969 as an outside point above twisted facet f28893 dist 0.00066 nearest vertices 2e-13
  CPU seconds to compute hull (after input): 0.989
Test -- t6
  CPU seconds to compute hull (after input): 0.993
Test -- t7
QH7085 Qhull precision warning: repartition coplanar point p512 from f121648 as an outside point above twisted facet f121661 dist 0.0011 nearest vertices 2e-13
QH6347 qhull precision error (qh_mergefacet): wide merge for facet f231543 into f231542 for mergetype 3 (concave).  maxdist  0 (0.0x) mindist -0.00026 (4040593870.1x) vertexdist 0.094  Allow with 'Q12' (allow-wide)
Test -- t8
QH7085 Qhull precision warning: repartition coplanar point p2360 from f22149 as an outside point above twisted facet f20962 dist 0.0017 nearest vertices 2.1e-13
QH7085 Qhull precision warning: repartition coplanar point p5349 from f61378 as an outside point above twisted facet f61399 dist 0.0056 nearest vertices 1.5e-13
QH7085 Qhull precision warning: repartition coplanar point p366 from f61425 as an outside point above twisted facet f61399 dist 0.0063 nearest vertices 1.5e-13
QH7085 Qhull precision warning: repartition coplanar point p2878 from f74011 as an outside point above twisted facet f61399 dist 0.017 nearest vertices 1.5e-13
  CPU seconds to compute hull (after input): 0.997
Test -- t9
  CPU seconds to compute hull (after input): 0.924
Test -- t10
  CPU seconds to compute hull (after input): 1.004
1591314378 Test 10 runs in 11 seconds (ave. 1100 msec) -- rbox 3000 C1,2e-13 c G2.0 D4 t1 | qhull Q14 d Qbb

Testing -- rbox 500 C1,2e-13 c G2.0 D5 t1 | qhull Q14 d Qbb >/d/bash/var/tmp/qtest-2020-06-04/qhull-965783.log
Test -- t1
  CPU seconds to compute hull (after input): 0.901
Test -- t2
QH7085 Qhull precision warning: repartition coplanar point p441 from f155582 as an outside point above twisted facet f155687 dist 0.0012 nearest vertices 2.7e-13
  CPU seconds to compute hull (after input): 1.069
Test -- t3
  CPU seconds to compute hull (after input): 0.925
Test -- t4
QH7085 Qhull precision warning: repartition coplanar point p843 from f17592 as an outside point above twisted facet f17727 dist 0.0012 nearest vertices 3e-13
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r7446 and r7444.  Nearest v41 and v78 dist 0.61 (6635311317759.2x)
Test -- t5
QH7085 Qhull precision warning: repartition coplanar point p38 from f99761 as an outside point above twisted facet f84442 dist 0.0045 nearest vertices 2.8e-13
  CPU seconds to compute hull (after input): 0.911
Test -- t6
  CPU seconds to compute hull (after input): 0.961
Test -- t7
QH7085 Qhull precision warning: repartition coplanar point p268 from f291988 as an outside point above twisted facet f291679 dist 0.013 nearest vertices 2.3e-13
  CPU seconds to compute hull (after input): 0.888
Test -- t8
  CPU seconds to compute hull (after input): 0.938
Test -- t9
QH7085 Qhull precision warning: repartition coplanar point p925 from f317207 as an outside point above twisted facet f317303 dist 0.014 nearest vertices 2.7e-13
QH6348 qhull precision error (qh_mergefacet): wide merge for pinched facet f317430 into f317603 for mergetype 3 (concave).  maxdist  0 (0x) mindist -0.002 (20692770256.2x) vertexdist 2.2e-13  Allow with 'Q12' (allow-wide)
Test -- t10
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r44665 and r44664.  Nearest v253 and v490 dist 0.58 (6291651853148.8x)
1591314389 Test 10 runs in 10 seconds (ave. 1000 msec) -- rbox 500 C1,2e-13 c G2.0 D5 t1 | qhull Q14 d Qbb

Testing -- rbox 100 C1,2e-13 c G2.0 D6 t1 | qhull Q14 d Qbb >/d/bash/var/tmp/qtest-2020-06-04/qhull-834030.log
Test -- t1
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r40264 and r40261.  Nearest v24 and v29 dist 0.8 (6057456805330.6x)
Test -- t2
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r22036 and r22035.  Nearest v38 and v64 dist 1.2 (8992021169760.2x)
Test -- t3
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r140925 and r140923.  Nearest v124 and v149 dist 0.74 (5629429151422.8x)
Test -- t4
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r41562 and r41555.  Nearest v13 and v24 dist 0.52 (3937835544171.1x)
Test -- t5
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r10090 and r10088.  Nearest v21 and v45 dist 0.44 (3372974355622.5x)
Test -- t6
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r104203 and r104152.  Nearest v12 and v127 dist 0.51 (3899853567278.4x)
Test -- t7
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r113761 and r113750.  Nearest v90 and v144 dist 0.54 (4106052672638.0x)
Test -- t8
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r64014 and r63556.  Nearest v59 and v79 dist 0.72 (5474375529407.1x)
Test -- t9
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r62473 and r62470.  Nearest v23 and v86 dist 0.76 (5797319173797.8x)
Test -- t10
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r56091 and r56070.  Nearest v24 and v32 dist 0.68 (5202677736978.0x)
1591314396 Test 10 runs in 6 seconds (ave. 600 msec) -- rbox 100 C1,2e-13 c G2.0 D6 t1 | qhull Q14 d Qbb

============================
== Time for pinched Delaunay triangulation of random point pairs (Q14, Q12)
== qh_next_facetmerge, qh_findbesthorizon (qh_distplane)
============================

Testing -- rbox 50000 C1,2e-13 D2 t1 | qhull Q14 d Qbb >/d/bash/var/tmp/qtest-2020-06-04/qhull-568369.log
Test -- t1
  CPU seconds to compute hull (after input): 0.529
Test -- t2
  CPU seconds to compute hull (after input): 0.544
Test -- t3
  CPU seconds to compute hull (after input): 0.462
Test -- t4
  CPU seconds to compute hull (after input): 0.539
Test -- t5
  CPU seconds to compute hull (after input): 0.514
Test -- t6
  CPU seconds to compute hull (after input): 0.482
Test -- t7
  CPU seconds to compute hull (after input): 0.46
Test -- t8
  CPU seconds to compute hull (after input): 0.522
Test -- t9
  CPU seconds to compute hull (after input): 0.499
Test -- t10
  CPU seconds to compute hull (after input): 0.478
1591314407 Test 10 runs in 10 seconds (ave. 1000 msec) -- rbox 50000 C1,2e-13 D2 t1 | qhull Q14 d Qbb

Testing -- rbox 5000 C1,2e-13 D3 t1 | qhull Q14 d Qbb >/d/bash/var/tmp/qtest-2020-06-04/qhull-436616.log
Test -- t1
  CPU seconds to compute hull (after input): 0.35
  Maximum distance of vertex below facet: -1.1e-13 (11.0x)
Test -- t2
  CPU seconds to compute hull (after input): 0.311
  Maximum distance of vertex below facet: -1.3e-13 (12.7x)
Test -- t3
  CPU seconds to compute hull (after input): 0.36
  Maximum distance of vertex below facet: -1.5e-13 (15.2x)
Test -- t4
  CPU seconds to compute hull (after input): 0.321
Test -- t5
  CPU seconds to compute hull (after input): 0.36
Test -- t6
  CPU seconds to compute hull (after input): 0.347
Test -- t7
  CPU seconds to compute hull (after input): 0.327
  Maximum distance of point above facet: 1.4e-13 (13.6x)
  Maximum distance of vertex below facet: -1.4e-13 (13.6x)
Test -- t8
  CPU seconds to compute hull (after input): 0.32
  Maximum distance of point above facet: 1.2e-13 (12.4x)
  Maximum distance of vertex below facet: -1.3e-13 (12.7x)
Test -- t9
QH6271 qhull topology error (qh_check_dupridge): wide merge (2392033422.9x wider) due to dupridge between f123716 and f123715 (vertex dist 2.4e-13), merge dist 0.0004, while processing p8866
  Maximum distance of point above facet: 1.7e-13 (16.5x)
Test -- t10
  CPU seconds to compute hull (after input): 0.291
1591314413 Test 10 runs in 5 seconds (ave. 500 msec) -- rbox 5000 C1,2e-13 D3 t1 | qhull Q14 d Qbb

Testing -- rbox 500 C1,2e-13 D4 t1 | qhull Q12 Q14 d Qbb >/d/bash/var/tmp/qtest-2020-06-04/qhull-637478.log
Test -- t1
  CPU seconds to compute hull (after input): 0.265
  Maximum distance of point above facet: 1.7e-13 (10.4x)
Test -- t2
  CPU seconds to compute hull (after input): 0.279
Test -- t3
  CPU seconds to compute hull (after input): 0.265
Test -- t4
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r37323 and r37309.  Nearest v145 and v655 dist 0.067 (4459578188183.3x)
Test -- t5
  CPU seconds to compute hull (after input): 0.259
  Maximum distance of point above facet: 2.1e-13 (12.9x)
  Maximum distance of vertex below facet: -0.00072 (43999621075.0x)
Test -- t6
  CPU seconds to compute hull (after input): 0.243
Test -- t7
QH7085 Qhull precision warning: repartition coplanar point p939 from f58978 as an outside point above twisted facet f53492 dist 0.00041 nearest vertices 2.1e-13
  CPU seconds to compute hull (after input): 0.252
Test -- t8
QH6391 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve opposite oriented ridges r49440 and r49431 in f83434 and f83454.  Nearest v702 and v749 dist 0.13 (8887619111449.9x)
Test -- t9
  CPU seconds to compute hull (after input): 0.284
Test -- t10
  CPU seconds to compute hull (after input): 0.283
  Maximum distance of point above facet: 2.2e-13 (13.3x)
  Maximum distance of vertex below facet: -2.2e-13 (13.3x)
1591314419 Test 10 runs in 5 seconds (ave. 500 msec) -- rbox 500 C1,2e-13 D4 t1 | qhull Q12 Q14 d Qbb

Testing -- rbox 300 C1,2e-13 D5 t1 | qhull Q12 Q14 d Qbb >/d/bash/var/tmp/qtest-2020-06-04/qhull-304863.log
Test -- t1
QH6271 qhull topology error (qh_check_dupridge): wide merge (5570546919.7x wider) due to dupridge between f164113 and f164214 (vertex dist 2.2e-13), merge dist 0.0012, while processing p459
QH6418 qhull precision error (qh_merge_twisted): twisted facet f151765 with pinched vertices.  Could merge vertices, but too wide to merge into neighbor.   mindist -0.019 maxdist  0 vertexdist 3.3e-13 neighbor f170719 mindist -0.014 maxdist  0
  Maximum distance of point above facet: 2.5e-13 (10.2x)
  Maximum distance of vertex below facet: -0.0012 (50158760830.2x)
Test -- t2
QH6271 qhull topology error (qh_check_dupridge): wide merge (347037085657.3x wider) due to dupridge between f142397 and f202075 (vertex dist 2e-13), merge dist 0.1, while processing p329
QH6271 qhull topology error (qh_check_dupridge): wide merge (18938032507.7x wider) due to dupridge between f345584 and f345474 (vertex dist 2.9e-13), merge dist 0.0056, while processing p557
  CPU seconds to compute hull (after input): 1.234
  Maximum distance of point above facet: 2.9e-13 (11.9x)
  Maximum distance of vertex below facet: -0.017 (687191049377.1x)
Test -- t3
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r23254 and r23262.  Nearest v99 and v153 dist 0.14 (6271081023221.3x)
Test -- t4
QH6271 qhull topology error (qh_check_dupridge): wide merge (454633750155.1x wider) due to dupridge between f270523 and f270385 (vertex dist 2.5e-13), merge dist 0.088, while processing p419
QH6391 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve opposite oriented ridges r200444 and r200522 in f270385 and f309294.  Nearest v250 and v544 dist 0.39 (16854722445792.8x)
  Maximum distance of point above facet: 0.00092 (37271597143.0x)
  Maximum distance of vertex below facet: -0.088 (3584450304447.4x)
Test -- t5
QH7085 Qhull precision warning: repartition coplanar point p35 from f123614 as an outside point above twisted facet f123219 dist 4.5e-05 nearest vertices 3.3e-13
QH6271 qhull topology error (qh_check_dupridge): wide merge (878413113784.2x wider) due to dupridge between f164350 and f164337 (vertex dist 2.4e-13), merge dist 0.19, while processing p499
  CPU seconds to compute hull (after input): 4.97
  Maximum distance of point above facet: 3.4e-13 (13.7x)
  Maximum distance of vertex below facet: -3.9e-13 (15.9x)
Test -- t6
QH7085 Qhull precision warning: repartition coplanar point p6 from f150669 as an outside point above twisted facet f150322 dist 0.0024 nearest vertices 3e-13
  CPU seconds to compute hull (after input): 1.122
  Maximum distance of point above facet: 4.1e-13 (16.8x)
  Maximum distance of vertex below facet: -3.7e-13 (15.1x)
Test -- t7
QH7085 Qhull precision warning: repartition coplanar point p444 from f199948 as an outside point above twisted facet f265269 dist 0.0018 nearest vertices 3e-13
QH6271 qhull topology error (qh_check_dupridge): wide merge (569356935583.7x wider) due to dupridge between f270435 and f270400 (vertex dist 2.7e-13), merge dist 0.17, while processing p182
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r215922 and r276482.  Nearest v67 and v208 dist 0.13 (5873339593550.7x)
  Maximum distance of point above facet: 0.0028 (112586859288.4x)
  Maximum distance of vertex below facet: -0.17 (6865829933136.7x)
Test -- t8
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f138124 and f138129 have the same vertices (skip 1, skip 1) and same horizon ridges to f82053 and f58330
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f138124 and f138129 have the same vertices (skip 2, skip 2) and same horizon ridges to f82053 and f58330
QH7084 qhull topology warning (qh_matchneighbor): will merge vertices to undo new facets -- f138124 and f138129 have the same vertices (skip 3, skip 3) and same horizon ridges to f82053 and f58330
QH6381 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve duplicate ridges r161343 and r161333.  Nearest v277 and v461 dist 0.3 (13107519691555.2x)
Test -- t9
QH6391 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve opposite oriented ridges r162905 and r162900 in f219542 and f219513.  Nearest v431 and v470 dist 0.33 (14493670237305.6x)
  Maximum distance of point above facet: 2.8e-13 (11.2x)
Test -- t10
QH6391 qhull topology error (qh_next_vertexmerge): no nearly adjacent vertices to resolve opposite oriented ridges r54841 and r54808 in f98872 and f98951.  Nearest v103 and v151 dist 0.24 (10377121912131.9x)
1591314432 Test 10 runs in 13 seconds (ave. 1300 msec) -- rbox 300 C1,2e-13 D5 t1 | qhull Q12 Q14 d Qbb

Testing -- rbox 100 C1,2e-13 D6 t1 | qhull Q14 d Qbb >/d/bash/var/tmp/qtest-2020-06-04/qhull-773541.log
Test -- t1
  CPU seconds to compute hull (after input): 1.056
  Maximum distance of vertex below facet: -3.7e-13 (10.6x)
Test -- t2
  CPU seconds to compute hull (after input): 0.983
Test -- t3
  CPU seconds to compute hull (after input): 0.951
Test -- t4
  CPU seconds to compute hull (after input): 1.057
  Maximum distance of point above facet: 3.6e-13 (10.3x)
  Maximum distance of vertex below facet: -3.6e-13 (10.4x)
Test -- t5
  CPU seconds to compute hull (after input): 1.024
  Maximum distance of point above facet: 3.9e-13 (11.2x)
  Maximum distance of vertex below facet: -3.5e-13 (10.0x)
Test -- t6
  CPU seconds to compute hull (after input): 1.096
  Maximum distance of point above facet: 3.6e-13 (10.2x)
  Maximum distance of vertex below facet: -3.6e-13 (10.2x)
Test -- t7
  CPU seconds to compute hull (after input): 1.125
  Maximum distance of point above facet: 3.6e-13 (10.3x)
  Maximum distance of vertex below facet: -3.9e-13 (11.2x)
Test -- t8
  CPU seconds to compute hull (after input): 0.959
  Maximum distance of point above facet: 3.9e-13 (11.2x)
Test -- t9
  CPU seconds to compute hull (after input): 0.996
  Maximum distance of vertex below facet: -3.5e-13 (10.1x)
Test -- t10
  CPU seconds to compute hull (after input): 1.042
1591314446 Test 10 runs in 13 seconds (ave. 1300 msec) -- rbox 100 C1,2e-13 D6 t1 | qhull Q14 d Qbb

===========================
=== N_TIMING test cases ===
===========================

============================
== Time for random points in a cube
============================

Testing -- rbox 1000000 D2 t1 | qhull  >/d/bash/var/tmp/qtest-2020-06-04/qhull-242219.log
Test -- t1
  CPU seconds to compute hull (after input): 0.105
Test -- t2
  CPU seconds to compute hull (after input): 0.099
Test -- t3
  CPU seconds to compute hull (after input): 0.099
Test -- t4
  CPU seconds to compute hull (after input): 0.099
Test -- t5
  CPU seconds to compute hull (after input): 0.098
Test -- t6
  CPU seconds to compute hull (after input): 0.103
Test -- t7
  CPU seconds to compute hull (after input): 0.109
Test -- t8
  CPU seconds to compute hull (after input): 0.103
Test -- t9
  CPU seconds to compute hull (after input): 0.121
Test -- t10
  CPU seconds to compute hull (after input): 0.102
1591314472 Test 10 runs in 24 seconds (ave. 2400 msec) -- rbox 1000000 D2 t1 | qhull 

Testing -- rbox 500000 D3 t1 | qhull  >/d/bash/var/tmp/qtest-2020-06-04/qhull-112621.log
Test -- t1
  CPU seconds to compute hull (after input): 0.105
Test -- t2
  CPU seconds to compute hull (after input): 0.092
Test -- t3
  CPU seconds to compute hull (after input): 0.099
Test -- t4
  CPU seconds to compute hull (after input): 0.106
Test -- t5
  CPU seconds to compute hull (after input): 0.109
Test -- t6
  CPU seconds to compute hull (after input): 0.114
Test -- t7
  CPU seconds to compute hull (after input): 0.109
Test -- t8
  CPU seconds to compute hull (after input): 0.095
Test -- t9
  CPU seconds to compute hull (after input): 0.122
Test -- t10
  CPU seconds to compute hull (after input): 0.103
1591314492 Test 10 runs in 19 seconds (ave. 1900 msec) -- rbox 500000 D3 t1 | qhull 

Testing -- rbox 200000 D4 t1 | qhull  >/d/bash/var/tmp/qtest-2020-06-04/qhull-248684.log
Test -- t1
  CPU seconds to compute hull (after input): 0.107
Test -- t2
  CPU seconds to compute hull (after input): 0.127
Test -- t3
  CPU seconds to compute hull (after input): 0.134
Test -- t4
  CPU seconds to compute hull (after input): 0.149
Test -- t5
  CPU seconds to compute hull (after input): 0.116
Test -- t6
  CPU seconds to compute hull (after input): 0.147
Test -- t7
  CPU seconds to compute hull (after input): 0.141
Test -- t8
  CPU seconds to compute hull (after input): 0.142
Test -- t9
  CPU seconds to compute hull (after input): 0.181
Test -- t10
  CPU seconds to compute hull (after input): 0.145
1591314505 Test 10 runs in 12 seconds (ave. 1200 msec) -- rbox 200000 D4 t1 | qhull 

Testing -- rbox 100000 D5 t1 | qhull Q12 >/d/bash/var/tmp/qtest-2020-06-04/qhull-183885.log
Test -- t1
  CPU seconds to compute hull (after input): 0.712
Test -- t2
  CPU seconds to compute hull (after input): 0.763
Test -- t3
  CPU seconds to compute hull (after input): 0.707
Test -- t4
  CPU seconds to compute hull (after input): 0.688
Test -- t5
  CPU seconds to compute hull (after input): 0.767
Test -- t6
  CPU seconds to compute hull (after input): 0.763
Test -- t7
  CPU seconds to compute hull (after input): 0.635
Test -- t8
  CPU seconds to compute hull (after input): 0.688
Test -- t9
  CPU seconds to compute hull (after input): 0.752
Test -- t10
  CPU seconds to compute hull (after input): 0.65
1591314520 Test 10 runs in 15 seconds (ave. 1500 msec) -- rbox 100000 D5 t1 | qhull Q12

Testing -- rbox 3000 D6 t1 | qhull  >/d/bash/var/tmp/qtest-2020-06-04/qhull-186040.log
Test -- t1
  CPU seconds to compute hull (after input): 0.931
Test -- t2
  CPU seconds to compute hull (after input): 0.959
Test -- t3
  CPU seconds to compute hull (after input): 1.084
Test -- t4
  CPU seconds to compute hull (after input): 0.908
Test -- t5
  CPU seconds to compute hull (after input): 0.785
Test -- t6
  CPU seconds to compute hull (after input): 0.979
Test -- t7
  CPU seconds to compute hull (after input): 0.887
Test -- t8
  CPU seconds to compute hull (after input): 0.995
Test -- t9
  CPU seconds to compute hull (after input): 0.959
Test -- t10
  CPU seconds to compute hull (after input): 0.903
1591314532 Test 10 runs in 12 seconds (ave. 1200 msec) -- rbox 3000 D6 t1 | qhull 

============================
== Time for random cospherical points
============================

Testing -- rbox 100000 s D2 t1 | qhull  >/d/bash/var/tmp/qtest-2020-06-04/qhull-121241.log
Test -- t1
  CPU seconds to compute hull (after input): 0.257
Test -- t2
  CPU seconds to compute hull (after input): 0.251
Test -- t3
  CPU seconds to compute hull (after input): 0.222
Test -- t4
  CPU seconds to compute hull (after input): 0.223
Test -- t5
  CPU seconds to compute hull (after input): 0.238
Test -- t6
  CPU seconds to compute hull (after input): 0.26
Test -- t7
  CPU seconds to compute hull (after input): 0.218
Test -- t8
  CPU seconds to compute hull (after input): 0.234
Test -- t9
  CPU seconds to compute hull (after input): 0.231
Test -- t10
  CPU seconds to compute hull (after input): 0.231
1591314541 Test 10 runs in 7 seconds (ave. 700 msec) -- rbox 100000 s D2 t1 | qhull 

Testing -- rbox 100000 s D3 t1 | qhull  >/d/bash/var/tmp/qtest-2020-06-04/qhull-389057.log
Test -- t1
  CPU seconds to compute hull (after input): 0.478
Test -- t2
  CPU seconds to compute hull (after input): 0.517
Test -- t3
  CPU seconds to compute hull (after input): 0.504
Test -- t4
  CPU seconds to compute hull (after input): 0.453
Test -- t5
  CPU seconds to compute hull (after input): 0.483
Test -- t6
  CPU seconds to compute hull (after input): 0.494
Test -- t7
  CPU seconds to compute hull (after input): 0.466
Test -- t8
  CPU seconds to compute hull (after input): 0.448
Test -- t9
  CPU seconds to compute hull (after input): 0.523
Test -- t10
  CPU seconds to compute hull (after input): 0.446
1591314552 Test 10 runs in 11 seconds (ave. 1100 msec) -- rbox 100000 s D3 t1 | qhull 

Testing -- rbox 50000 s D4 t1 | qhull  >/d/bash/var/tmp/qtest-2020-06-04/qhull-790781.log
Test -- t1
  CPU seconds to compute hull (after input): 1.135
Test -- t2
  CPU seconds to compute hull (after input): 1.031
Test -- t3
  CPU seconds to compute hull (after input): 1.127
Test -- t4
  CPU seconds to compute hull (after input): 1.056
Test -- t5
  CPU seconds to compute hull (after input): 1.086
Test -- t6
  CPU seconds to compute hull (after input): 1.04
Test -- t7
  CPU seconds to compute hull (after input): 1.149
Test -- t8
  CPU seconds to compute hull (after input): 1.089
Test -- t9
  CPU seconds to compute hull (after input): 1.102
Test -- t10
  CPU seconds to compute hull (after input): 1.07
1591314571 Test 10 runs in 18 seconds (ave. 1800 msec) -- rbox 50000 s D4 t1 | qhull 

== Repeat with qconvex, bin/qconvex is built with libqhull instead of libqhull_r

Testing -- rbox 50000 s D4 t1 | qconvex  >/d/bash/var/tmp/qtest-2020-06-04/qhull-393367.log
Test -- t1
  CPU seconds to compute hull (after input): 1.01
Test -- t2
  CPU seconds to compute hull (after input): 1.052
Test -- t3
  CPU seconds to compute hull (after input): 0.953
Test -- t4
  CPU seconds to compute hull (after input): 1.005
Test -- t5
  CPU seconds to compute hull (after input): 1.006
Test -- t6
  CPU seconds to compute hull (after input): 1.004
Test -- t7
  CPU seconds to compute hull (after input): 1.096
Test -- t8
  CPU seconds to compute hull (after input): 1.073
Test -- t9
  CPU seconds to compute hull (after input): 1.025
Test -- t10
  CPU seconds to compute hull (after input): 1.068
1591314588 Test 10 runs in 16 seconds (ave. 1600 msec) -- rbox 50000 s D4 t1 | qconvex 

Testing -- rbox 10000 s D5 t1 | qhull  >/d/bash/var/tmp/qtest-2020-06-04/qhull-995953.log
Test -- t1
  CPU seconds to compute hull (after input): 1.423
Test -- t2
  CPU seconds to compute hull (after input): 1.367
Test -- t3
  CPU seconds to compute hull (after input): 1.44
Test -- t4
  CPU seconds to compute hull (after input): 1.375
Test -- t5
  CPU seconds to compute hull (after input): 1.406
Test -- t6
  CPU seconds to compute hull (after input): 1.421
Test -- t7
  CPU seconds to compute hull (after input): 1.475
Test -- t8
  CPU seconds to compute hull (after input): 1.464
Test -- t9
  CPU seconds to compute hull (after input): 1.4
Test -- t10
  CPU seconds to compute hull (after input): 1.453
1591314608 Test 10 runs in 19 seconds (ave. 1900 msec) -- rbox 10000 s D5 t1 | qhull 

Testing -- rbox 1000 s D6 t1 | qhull  >/d/bash/var/tmp/qtest-2020-06-04/qhull-665493.log
Test -- t1
  CPU seconds to compute hull (after input): 0.705
Test -- t2
  CPU seconds to compute hull (after input): 0.735
Test -- t3
  CPU seconds to compute hull (after input): 0.681
Test -- t4
  CPU seconds to compute hull (after input): 0.66
Test -- t5
  CPU seconds to compute hull (after input): 0.716
Test -- t6
  CPU seconds to compute hull (after input): 0.694
Test -- t7
  CPU seconds to compute hull (after input): 0.669
Test -- t8
  CPU seconds to compute hull (after input): 0.655
Test -- t9
  CPU seconds to compute hull (after input): 0.682
Test -- t10
  CPU seconds to compute hull (after input): 0.655
1591314619 Test 10 runs in 10 seconds (ave. 1000 msec) -- rbox 1000 s D6 t1 | qhull 

============================
== Time for extreme post-merge of random cospherical points
============================

Testing -- rbox 100000 s D2 t1 | qhull C0.01 >/d/bash/var/tmp/qtest-2020-06-04/qhull-533740.log
Test -- t1
  CPU seconds to compute hull (after input): 0.647
Test -- t2
  CPU seconds to compute hull (after input): 0.575
Test -- t3
  CPU seconds to compute hull (after input): 0.604
Test -- t4
  CPU seconds to compute hull (after input): 0.652
Test -- t5
  CPU seconds to compute hull (after input): 0.599
Test -- t6
  CPU seconds to compute hull (after input): 0.668
Test -- t7
  CPU seconds to compute hull (after input): 0.639
Test -- t8
  CPU seconds to compute hull (after input): 0.629
Test -- t9
  CPU seconds to compute hull (after input): 0.644
Test -- t10
  CPU seconds to compute hull (after input): 0.639
1591314632 Test 10 runs in 12 seconds (ave. 1200 msec) -- rbox 100000 s D2 t1 | qhull C0.01

Testing -- rbox 10000 s D3 t1 | qhull C0.01 >/d/bash/var/tmp/qtest-2020-06-04/qhull-935464.log
Test -- t1
  CPU seconds to compute hull (after input): 0.14
Test -- t2
  CPU seconds to compute hull (after input): 0.147
Test -- t3
  CPU seconds to compute hull (after input): 0.174
Test -- t4
  CPU seconds to compute hull (after input): 0.165
Test -- t5
  CPU seconds to compute hull (after input): 0.148
Test -- t6
  CPU seconds to compute hull (after input): 0.149
Test -- t7
  CPU seconds to compute hull (after input): 0.144
Test -- t8
  CPU seconds to compute hull (after input): 0.142
Test -- t9
  CPU seconds to compute hull (after input): 0.142
Test -- t10
  CPU seconds to compute hull (after input): 0.145
1591314636 Test 10 runs in 3 seconds (ave. 300 msec) -- rbox 10000 s D3 t1 | qhull C0.01

Testing -- rbox 5000 s D4 t1 | qhull C0.01 >/d/bash/var/tmp/qtest-2020-06-04/qhull-602849.log
Test -- t1
  CPU seconds to compute hull (after input): 0.395
Test -- t2
  CPU seconds to compute hull (after input): 0.426
Test -- t3
  CPU seconds to compute hull (after input): 0.403
Test -- t4
  CPU seconds to compute hull (after input): 0.375
Test -- t5
  CPU seconds to compute hull (after input): 0.407
Test -- t6
  CPU seconds to compute hull (after input): 0.409
Test -- t7
  CPU seconds to compute hull (after input): 0.399
Test -- t8
  CPU seconds to compute hull (after input): 0.415
Test -- t9
  CPU seconds to compute hull (after input): 0.374
Test -- t10
  CPU seconds to compute hull (after input): 0.437
1591314643 Test 10 runs in 6 seconds (ave. 600 msec) -- rbox 5000 s D4 t1 | qhull C0.01

== Repeat with qconvex, bin/qconvex is built with libqhull instead of libqhull_r

Testing -- rbox 5000 s D4 t1 | qconvex C0.01 >/d/bash/var/tmp/qtest-2020-06-04/qhull-337188.log
Test -- t1
  CPU seconds to compute hull (after input): 0.42
Test -- t2
  CPU seconds to compute hull (after input): 0.384
Test -- t3
  CPU seconds to compute hull (after input): 0.362
Test -- t4
  CPU seconds to compute hull (after input): 0.393
Test -- t5
  CPU seconds to compute hull (after input): 0.42
Test -- t6
  CPU seconds to compute hull (after input): 0.43
Test -- t7
  CPU seconds to compute hull (after input): 0.392
Test -- t8
  CPU seconds to compute hull (after input): 0.376
Test -- t9
  CPU seconds to compute hull (after input): 0.444
Test -- t10
  CPU seconds to compute hull (after input): 0.406
1591314650 Test 10 runs in 6 seconds (ave. 600 msec) -- rbox 5000 s D4 t1 | qconvex C0.01

Testing -- rbox 2000 s D5 t1 | qhull C0.01 >/d/bash/var/tmp/qtest-2020-06-04/qhull-71527.log
Test -- t1
  CPU seconds to compute hull (after input): 0.805
Test -- t2
  CPU seconds to compute hull (after input): 0.8
Test -- t3
  CPU seconds to compute hull (after input): 0.847
Test -- t4
  CPU seconds to compute hull (after input): 0.809
Test -- t5
  CPU seconds to compute hull (after input): 0.872
Test -- t6
  CPU seconds to compute hull (after input): 0.877
Test -- t7
  CPU seconds to compute hull (after input): 0.819
Test -- t8
  CPU seconds to compute hull (after input): 0.826
Test -- t9
  CPU seconds to compute hull (after input): 0.806
Test -- t10
  CPU seconds to compute hull (after input): 0.811
1591314662 Test 10 runs in 11 seconds (ave. 1100 msec) -- rbox 2000 s D5 t1 | qhull C0.01

Testing -- rbox 500 s D6 t1 | qhull C0.01 >/d/bash/var/tmp/qtest-2020-06-04/qhull-473251.log
Test -- t1
  CPU seconds to compute hull (after input): 0.826
Test -- t2
  CPU seconds to compute hull (after input): 0.848
Test -- t3
  CPU seconds to compute hull (after input): 0.812
Test -- t4
  CPU seconds to compute hull (after input): 0.907
Test -- t5
  CPU seconds to compute hull (after input): 0.879
Test -- t6
  CPU seconds to compute hull (after input): 0.907
Test -- t7
  CPU seconds to compute hull (after input): 0.852
Test -- t8
  CPU seconds to compute hull (after input): 0.825
Test -- t9
  CPU seconds to compute hull (after input): 0.851
Test -- t10
  CPU seconds to compute hull (after input): 0.884
1591314675 Test 10 runs in 12 seconds (ave. 1200 msec) -- rbox 500 s D6 t1 | qhull C0.01

============================
== Time for rotated cubical points with large merged facets
============================

Testing -- rbox 5000000 W0 D2 t1 | qhull QR3 >/d/bash/var/tmp/qtest-2020-06-04/qhull-874975.log
Test -- t1
  CPU seconds to compute hull (after input): 0.922
Test -- t2
  CPU seconds to compute hull (after input): 0.854
Test -- t3
  CPU seconds to compute hull (after input): 0.892
Test -- t4
  CPU seconds to compute hull (after input): 0.862
Test -- t5
  CPU seconds to compute hull (after input): 0.985
Test -- t6
  CPU seconds to compute hull (after input): 0.838
Test -- t7
  CPU seconds to compute hull (after input): 0.826
Test -- t8
  CPU seconds to compute hull (after input): 0.801
Test -- t9
  CPU seconds to compute hull (after input): 0.833
Test -- t10
  CPU seconds to compute hull (after input): 0.863
1591314778 Test 10 runs in 102 seconds (ave. 10200 msec) -- rbox 5000000 W0 D2 t1 | qhull QR3

Testing -- rbox 1000000 W0 D3 t1 | qhull QR3 >/d/bash/var/tmp/qtest-2020-06-04/qhull-823106.log
Test -- t1
  CPU seconds to compute hull (after input): 0.621
Test -- t2
  CPU seconds to compute hull (after input): 0.721
Test -- t3
  CPU seconds to compute hull (after input): 0.549
Test -- t4
  CPU seconds to compute hull (after input): 0.6
Test -- t5
  CPU seconds to compute hull (after input): 0.575
Test -- t6
  CPU seconds to compute hull (after input): 0.635
Test -- t7
  CPU seconds to compute hull (after input): 0.591
Test -- t8
  CPU seconds to compute hull (after input): 0.646
Test -- t9
  CPU seconds to compute hull (after input): 0.742
Test -- t10
  CPU seconds to compute hull (after input): 0.614
1591314815 Test 10 runs in 36 seconds (ave. 3600 msec) -- rbox 1000000 W0 D3 t1 | qhull QR3

Testing -- rbox 100000 W0 D4 t1 | qhull QR3 >/d/bash/var/tmp/qtest-2020-06-04/qhull-95232.log
Test -- t1
  CPU seconds to compute hull (after input): 0.437
Test -- t2
  CPU seconds to compute hull (after input): 0.417
Test -- t3
  CPU seconds to compute hull (after input): 0.403
Test -- t4
  CPU seconds to compute hull (after input): 0.419
Test -- t5
  CPU seconds to compute hull (after input): 0.416
Test -- t6
  CPU seconds to compute hull (after input): 0.423
Test -- t7
  CPU seconds to compute hull (after input): 0.417
Test -- t8
  CPU seconds to compute hull (after input): 0.381
Test -- t9
  CPU seconds to compute hull (after input): 0.413
Test -- t10
  CPU seconds to compute hull (after input): 0.46
1591314826 Test 10 runs in 10 seconds (ave. 1000 msec) -- rbox 100000 W0 D4 t1 | qhull QR3

Testing -- rbox 10000 W0 D5 t1 | qhull QR3 >/d/bash/var/tmp/qtest-2020-06-04/qhull-430002.log
Test -- t1
  CPU seconds to compute hull (after input): 0.654
Test -- t2
  CPU seconds to compute hull (after input): 0.685
Test -- t3
  CPU seconds to compute hull (after input): 0.657
Test -- t4
  CPU seconds to compute hull (after input): 0.628
Test -- t5
  CPU seconds to compute hull (after input): 0.699
Test -- t6
  CPU seconds to compute hull (after input): 0.618
Test -- t7
  CPU seconds to compute hull (after input): 0.614
Test -- t8
  CPU seconds to compute hull (after input): 0.655
Test -- t9
  CPU seconds to compute hull (after input): 0.69
Test -- t10
  CPU seconds to compute hull (after input): 0.807
1591314836 Test 10 runs in 9 seconds (ave. 900 msec) -- rbox 10000 W0 D5 t1 | qhull QR3

Testing -- rbox 1000 W0 D6 t1 | qhull QR3 >/d/bash/var/tmp/qtest-2020-06-04/qhull-764772.log
Test -- t1
  CPU seconds to compute hull (after input): 0.91
Test -- t2
  CPU seconds to compute hull (after input): 0.918
Test -- t3
  CPU seconds to compute hull (after input): 0.874
Test -- t4
  CPU seconds to compute hull (after input): 0.827
Test -- t5
  CPU seconds to compute hull (after input): 0.827
Test -- t6
  CPU seconds to compute hull (after input): 0.923
Test -- t7
  CPU seconds to compute hull (after input): 0.821
Test -- t8
  CPU seconds to compute hull (after input):  1
Test -- t9
  CPU seconds to compute hull (after input): 0.839
Test -- t10
  CPU seconds to compute hull (after input): 0.908
1591314848 Test 10 runs in 11 seconds (ave. 1100 msec) -- rbox 1000 W0 D6 t1 | qhull QR3

============================
== Time for joggled, rotated cubical points with multiple retries
============================

Testing -- rbox 5000000 W0 D2 t1 | qhull QR3 QJ >/d/bash/var/tmp/qtest-2020-06-04/qhull-699973.log
Test -- t1
  CPU seconds to compute hull (after input): 0.837
Test -- t2
  CPU seconds to compute hull (after input): 0.764
Test -- t3
  CPU seconds to compute hull (after input): 0.733
Test -- t4
  CPU seconds to compute hull (after input): 0.723
Test -- t5
  CPU seconds to compute hull (after input): 0.819
Test -- t6
  CPU seconds to compute hull (after input): 0.81
Test -- t7
  CPU seconds to compute hull (after input): 0.732
Test -- t8
  CPU seconds to compute hull (after input): 0.799
Test -- t9
  CPU seconds to compute hull (after input): 0.803
Test -- t10
  CPU seconds to compute hull (after input): 0.712
1591314950 Test 10 runs in 101 seconds (ave. 10100 msec) -- rbox 5000000 W0 D2 t1 | qhull QR3 QJ

Testing -- rbox 1000000 W0 D3 t1 | qhull QR3 QJ >/d/bash/var/tmp/qtest-2020-06-04/qhull-114627.log
Test -- t1
  CPU seconds to compute hull (after input): 1.327
  After 2 retries, input joggled by: 3.5e-10
Test -- t2
  CPU seconds to compute hull (after input): 1.996
  After 3 retries, input joggled by: 3.5e-09
Test -- t3
  CPU seconds to compute hull (after input): 1.311
  After 2 retries, input joggled by: 3.5e-10
Test -- t4
  CPU seconds to compute hull (after input): 0.522
Test -- t5
  CPU seconds to compute hull (after input): 0.478
Test -- t6
  CPU seconds to compute hull (after input): 1.074
  After 1 retries, input joggled by: 3.5e-11
Test -- t7
  CPU seconds to compute hull (after input): 1.308
  After 2 retries, input joggled by: 3.5e-10
Test -- t8
  CPU seconds to compute hull (after input): 1.455
  After 2 retries, input joggled by: 3.5e-10
Test -- t9
  CPU seconds to compute hull (after input): 1.62
  After 2 retries, input joggled by: 3.5e-10
Test -- t10
  CPU seconds to compute hull (after input): 1.542
  After 2 retries, input joggled by: 3.5e-10
1591314995 Test 10 runs in 44 seconds (ave. 4400 msec) -- rbox 1000000 W0 D3 t1 | qhull QR3 QJ

Testing -- rbox 100000 W0 D4 t1 | qhull QR3 QJ >/d/bash/var/tmp/qtest-2020-06-04/qhull-587615.log
Test -- t1
  CPU seconds to compute hull (after input): 0.326
  After 3 retries, input joggled by: 5.7e-09
Test -- t2
  CPU seconds to compute hull (after input): 0.433
  After 3 retries, input joggled by: 5.7e-09
Test -- t3
  CPU seconds to compute hull (after input): 0.347
  After 2 retries, input joggled by: 5.7e-10
Test -- t4
  CPU seconds to compute hull (after input): 0.345
  After 2 retries, input joggled by: 5.6e-10
Test -- t5
  CPU seconds to compute hull (after input): 0.383
  After 2 retries, input joggled by: 5.7e-10
Test -- t6
  CPU seconds to compute hull (after input): 0.325
  After 2 retries, input joggled by: 5.7e-10
Test -- t7
  CPU seconds to compute hull (after input): 0.385
  After 2 retries, input joggled by: 5.7e-10
Test -- t8
  CPU seconds to compute hull (after input): 0.339
  After 2 retries, input joggled by: 5.7e-10
Test -- t9
  CPU seconds to compute hull (after input): 0.309
  After 2 retries, input joggled by: 5.7e-10
Test -- t10
  CPU seconds to compute hull (after input): 0.465
  After 3 retries, input joggled by: 5.7e-09
1591315005 Test 10 runs in 10 seconds (ave. 1000 msec) -- rbox 100000 W0 D4 t1 | qhull QR3 QJ

Testing -- rbox 10000 W0 D5 t1 | qhull QR3 QJ >/d/bash/var/tmp/qtest-2020-06-04/qhull-922385.log
Test -- t1
  CPU seconds to compute hull (after input): 0.967
  After 4 retries, input joggled by: 8.3e-08
Test -- t2
  CPU seconds to compute hull (after input): 0.716
  After 3 retries, input joggled by: 8.3e-09
Test -- t3
  CPU seconds to compute hull (after input): 0.922
  After 4 retries, input joggled by: 8.4e-08
Test -- t4
  CPU seconds to compute hull (after input): 0.478
  After 2 retries, input joggled by: 7.9e-10
Test -- t5
  CPU seconds to compute hull (after input): 0.638
  After 3 retries, input joggled by: 8.4e-09
Test -- t6
  CPU seconds to compute hull (after input): 0.624
  After 3 retries, input joggled by: 8.1e-09
Test -- t7
  CPU seconds to compute hull (after input): 0.614
  After 3 retries, input joggled by: 8.4e-09
Test -- t8
  CPU seconds to compute hull (after input): 0.462
  After 2 retries, input joggled by: 8.4e-10
Test -- t9
  CPU seconds to compute hull (after input): 0.456
  After 3 retries, input joggled by: 8.5e-09
Test -- t10
  CPU seconds to compute hull (after input): 0.448
  After 2 retries, input joggled by: 8.3e-10
1591315014 Test 10 runs in 9 seconds (ave. 900 msec) -- rbox 10000 W0 D5 t1 | qhull QR3 QJ

Testing -- rbox 1000 W0 D6 t1 | qhull QR3 QJ >/d/bash/var/tmp/qtest-2020-06-04/qhull-723678.log
Test -- t1
  CPU seconds to compute hull (after input): 1.123
  After 3 retries, input joggled by: 1e-08
Test -- t2
  CPU seconds to compute hull (after input): 0.903
  After 2 retries, input joggled by: 1e-09
Test -- t3
  CPU seconds to compute hull (after input): 0.804
  After 2 retries, input joggled by: 1e-09
Test -- t4
  CPU seconds to compute hull (after input): 0.721
  After 3 retries, input joggled by: 1e-08
Test -- t5
  CPU seconds to compute hull (after input): 0.608
  After 2 retries, input joggled by: 1.1e-09
Test -- t6
  CPU seconds to compute hull (after input): 0.937
  After 3 retries, input joggled by: 9.9e-09
Test -- t7
  CPU seconds to compute hull (after input): 0.735
  After 2 retries, input joggled by: 9.8e-10
Test -- t8
  CPU seconds to compute hull (after input): 0.559
  After 2 retries, input joggled by: 9.7e-10
Test -- t9
  CPU seconds to compute hull (after input): 0.842
  After 2 retries, input joggled by: 1.1e-09
Test -- t10
  CPU seconds to compute hull (after input): 0.663
  After 2 retries, input joggled by: 9.9e-10
1591315026 Test 10 runs in 11 seconds (ave. 1100 msec) -- rbox 1000 W0 D6 t1 | qhull QR3 QJ

============================
== Time for joggled, nearly cubical points
============================

Testing -- rbox 1000000 W1e-13 D2 t1 | qhull QJ >/d/bash/var/tmp/qtest-2020-06-04/qhull-125402.log
Test -- t1
  CPU seconds to compute hull (after input): 0.321
  After 1 retries, input joggled by: 1.3e-11
Test -- t2
  CPU seconds to compute hull (after input): 0.157
Test -- t3
  CPU seconds to compute hull (after input): 0.193
Test -- t4
  CPU seconds to compute hull (after input): 0.165
Test -- t5
  CPU seconds to compute hull (after input): 0.174
Test -- t6
  CPU seconds to compute hull (after input): 0.169
Test -- t7
  CPU seconds to compute hull (after input): 0.357
  After 1 retries, input joggled by: 1.3e-11
Test -- t8
  CPU seconds to compute hull (after input): 0.184
Test -- t9
  CPU seconds to compute hull (after input): 0.205
Test -- t10
  CPU seconds to compute hull (after input): 0.172
1591315053 Test 10 runs in 26 seconds (ave. 2600 msec) -- rbox 1000000 W1e-13 D2 t1 | qhull QJ

Testing -- rbox 500000 W1e-13 D3 t1 | qhull QJ >/d/bash/var/tmp/qtest-2020-06-04/qhull-529281.log
Test -- t1
  CPU seconds to compute hull (after input): 1.32
  After 4 retries, input joggled by: 2.1e-08
Test -- t2
  CPU seconds to compute hull (after input): 1.079
  After 3 retries, input joggled by: 2.1e-09
Test -- t3
  CPU seconds to compute hull (after input): 1.055
  After 3 retries, input joggled by: 2.1e-09
Test -- t4
  CPU seconds to compute hull (after input): 1.303
  After 4 retries, input joggled by: 2.1e-08
Test -- t5
  CPU seconds to compute hull (after input): 1.163
  After 3 retries, input joggled by: 2.1e-09
Test -- t6
  CPU seconds to compute hull (after input): 1.109
  After 3 retries, input joggled by: 2.1e-09
Test -- t7
  CPU seconds to compute hull (after input): 1.053
  After 3 retries, input joggled by: 2.1e-09
Test -- t8
  CPU seconds to compute hull (after input): 0.983
  After 3 retries, input joggled by: 2.1e-09
Test -- t9
  CPU seconds to compute hull (after input): 1.361
  After 4 retries, input joggled by: 2.1e-08
Test -- t10
  CPU seconds to compute hull (after input): 0.981
  After 3 retries, input joggled by: 2.1e-09
1591315083 Test 10 runs in 29 seconds (ave. 2900 msec) -- rbox 500000 W1e-13 D3 t1 | qhull QJ

Testing -- rbox 100000 W1e-13 D4 t1 | qhull QJ >/d/bash/var/tmp/qtest-2020-06-04/qhull-533591.log
Test -- t1
  CPU seconds to compute hull (after input): 0.653
  After 4 retries, input joggled by: 3e-08
Test -- t2
  CPU seconds to compute hull (after input): 0.463
  After 3 retries, input joggled by: 3e-09
Test -- t3
  CPU seconds to compute hull (after input): 0.65
  After 4 retries, input joggled by: 3e-08
Test -- t4
  CPU seconds to compute hull (after input): 0.47
  After 3 retries, input joggled by: 3e-09
Test -- t5
  CPU seconds to compute hull (after input): 0.583
  After 4 retries, input joggled by: 3e-08
Test -- t6
  CPU seconds to compute hull (after input): 0.657
  After 4 retries, input joggled by: 3e-08
Test -- t7
  CPU seconds to compute hull (after input): 0.453
  After 3 retries, input joggled by: 3e-09
Test -- t8
  CPU seconds to compute hull (after input): 0.434
  After 3 retries, input joggled by: 3e-09
Test -- t9
  CPU seconds to compute hull (after input): 0.55
  After 3 retries, input joggled by: 3e-09
Test -- t10
  CPU seconds to compute hull (after input): 0.668
  After 4 retries, input joggled by: 3e-08
1591315095 Test 10 runs in 11 seconds (ave. 1100 msec) -- rbox 100000 W1e-13 D4 t1 | qhull QJ

Testing -- rbox 10000 W1e-13 D5 t1 | qhull QJ >/d/bash/var/tmp/qtest-2020-06-04/qhull-468792.log
Test -- t1
  CPU seconds to compute hull (after input): 0.5
  After 3 retries, input joggled by: 4.1e-09
Test -- t2
  CPU seconds to compute hull (after input): 0.86
  After 3 retries, input joggled by: 4.1e-09
Test -- t3
  CPU seconds to compute hull (after input): 0.796
  After 4 retries, input joggled by: 4.1e-08
Test -- t4
  CPU seconds to compute hull (after input): 0.894
  After 4 retries, input joggled by: 4.1e-08
Test -- t5
  CPU seconds to compute hull (after input): 0.575
  After 3 retries, input joggled by: 4.1e-09
Test -- t6
  CPU seconds to compute hull (after input): 0.83
  After 4 retries, input joggled by: 4.1e-08
Test -- t7
  CPU seconds to compute hull (after input): 0.545
  After 3 retries, input joggled by: 4.1e-09
Test -- t8
  CPU seconds to compute hull (after input): 0.593
  After 3 retries, input joggled by: 4.1e-09
Test -- t9
  CPU seconds to compute hull (after input): 0.852
  After 4 retries, input joggled by: 4.1e-08
Test -- t10
  CPU seconds to compute hull (after input): 0.759
  After 4 retries, input joggled by: 4.1e-08
1591315106 Test 10 runs in 10 seconds (ave. 1000 msec) -- rbox 10000 W1e-13 D5 t1 | qhull QJ

Testing -- rbox 1000 W1e-13 D6 t1 | qhull QJ >/d/bash/var/tmp/qtest-2020-06-04/qhull-337039.log
Test -- t1
  CPU seconds to compute hull (after input): 0.658
  After 2 retries, input joggled by: 5.3e-10
Test -- t2
  CPU seconds to compute hull (after input): 0.741
  After 2 retries, input joggled by: 5.3e-10
Test -- t3
  CPU seconds to compute hull (after input): 0.782
  After 2 retries, input joggled by: 5.3e-10
Test -- t4
  CPU seconds to compute hull (after input): 1.135
  After 2 retries, input joggled by: 5.3e-10
Test -- t5
  CPU seconds to compute hull (after input): 1.04
  After 3 retries, input joggled by: 5.3e-09
Test -- t6
  CPU seconds to compute hull (after input): 0.693
  After 2 retries, input joggled by: 5.3e-10
Test -- t7
  CPU seconds to compute hull (after input): 0.981
  After 3 retries, input joggled by: 5.3e-09
Test -- t8
  CPU seconds to compute hull (after input): 0.884
  After 3 retries, input joggled by: 5.3e-09
Test -- t9
  CPU seconds to compute hull (after input): 1.183
  After 3 retries, input joggled by: 5.3e-09
Test -- t10
  CPU seconds to compute hull (after input): 0.862
  After 3 retries, input joggled by: 5.3e-09
1591315119 Test 10 runs in 12 seconds (ave. 1200 msec) -- rbox 1000 W1e-13 D6 t1 | qhull QJ

============================
== Time for merging nearly cubical points
============================

Testing -- rbox 1000000 W1e-13 D2 t1 | qhull  >/d/bash/var/tmp/qtest-2020-06-04/qhull-272240.log
Test -- t1
  CPU seconds to compute hull (after input): 0.208
Test -- t2
  CPU seconds to compute hull (after input): 0.197
Test -- t3
  CPU seconds to compute hull (after input): 0.232
Test -- t4
  CPU seconds to compute hull (after input): 0.213
Test -- t5
  CPU seconds to compute hull (after input): 0.179
Test -- t6
  CPU seconds to compute hull (after input): 0.209
Test -- t7
  CPU seconds to compute hull (after input): 0.194
Test -- t8
  CPU seconds to compute hull (after input): 0.214
Test -- t9
  CPU seconds to compute hull (after input): 0.193
Test -- t10
  CPU seconds to compute hull (after input): 0.223
1591315146 Test 10 runs in 26 seconds (ave. 2600 msec) -- rbox 1000000 W1e-13 D2 t1 | qhull 

Testing -- rbox 1000000 W1e-13 D3 t1 | qhull  >/d/bash/var/tmp/qtest-2020-06-04/qhull-142642.log
Test -- t1
  CPU seconds to compute hull (after input): 1.418
Test -- t2
  CPU seconds to compute hull (after input): 1.07
Test -- t3
  CPU seconds to compute hull (after input): 1.273
Test -- t4
  CPU seconds to compute hull (after input): 1.124
Test -- t5
  CPU seconds to compute hull (after input): 1.111
Test -- t6
  CPU seconds to compute hull (after input): 1.152
Test -- t7
  CPU seconds to compute hull (after input): 1.083
Test -- t8
  CPU seconds to compute hull (after input): 1.255
Test -- t9
  CPU seconds to compute hull (after input): 1.102
Test -- t10
  CPU seconds to compute hull (after input): 1.237
1591315193 Test 10 runs in 46 seconds (ave. 4600 msec) -- rbox 1000000 W1e-13 D3 t1 | qhull 

Testing -- rbox 100000 W1e-13 D4 t1 | qhull Q12 >/d/bash/var/tmp/qtest-2020-06-04/qhull-216061.log
Test -- t1
  CPU seconds to compute hull (after input): 0.958
Test -- t2
  CPU seconds to compute hull (after input): 0.998
Test -- t3
  CPU seconds to compute hull (after input): 1.68
Test -- t4
  CPU seconds to compute hull (after input): 1.194
Test -- t5
  CPU seconds to compute hull (after input): 1.471
  Maximum distance of point above facet: 1.7e-13 (16.9x)
  Maximum distance of vertex below facet: -1.4e-13 (13.9x)
Test -- t6
  CPU seconds to compute hull (after input): 1.17
Test -- t7
  CPU seconds to compute hull (after input): 0.964
Test -- t8
  CPU seconds to compute hull (after input): 1.509
Test -- t9
  CPU seconds to compute hull (after input): 2.097
  Maximum distance of vertex below facet: -1.3e-13 (12.6x)
Test -- t10
  CPU seconds to compute hull (after input): 1.882
1591315213 Test 10 runs in 20 seconds (ave. 2000 msec) -- rbox 100000 W1e-13 D4 t1 | qhull Q12

Testing -- rbox 2000 W1e-13 D5 t1 | qhull Q12 >/d/bash/var/tmp/qtest-2020-06-04/qhull-885601.log
Test -- t1
  CPU seconds to compute hull (after input): 0.504
Test -- t2
  CPU seconds to compute hull (after input): 0.509
Test -- t3
  CPU seconds to compute hull (after input): 0.513
Test -- t4
  CPU seconds to compute hull (after input): 0.505
Test -- t5
  CPU seconds to compute hull (after input): 0.446
Test -- t6
  CPU seconds to compute hull (after input): 0.517
Test -- t7
  CPU seconds to compute hull (after input): 0.485
Test -- t8
QH6271 qhull topology error (qh_check_dupridge): wide merge (100.6x wider) due to dupridge between f23261 and f23245 (vertex dist 0.16), merge dist 2e-12, while processing p54
  CPU seconds to compute hull (after input): 0.543
Test -- t9
  CPU seconds to compute hull (after input): 0.55
Test -- t10
  CPU seconds to compute hull (after input): 0.531
1591315221 Test 10 runs in 7 seconds (ave. 700 msec) -- rbox 2000 W1e-13 D5 t1 | qhull Q12

Testing -- rbox 500 W1e-13 D6 t1 | qhull  >/d/bash/var/tmp/qtest-2020-06-04/qhull-153417.log
Test -- t1
  CPU seconds to compute hull (after input): 0.41
Test -- t2
  CPU seconds to compute hull (after input): 0.455
Test -- t3
  CPU seconds to compute hull (after input): 0.491
Test -- t4
  CPU seconds to compute hull (after input): 0.428
Test -- t5
  CPU seconds to compute hull (after input): 0.394
Test -- t6
  CPU seconds to compute hull (after input): 0.436
Test -- t7
  CPU seconds to compute hull (after input): 0.465
Test -- t8
  CPU seconds to compute hull (after input): 0.464
Test -- t9
  CPU seconds to compute hull (after input): 0.378
Test -- t10
  CPU seconds to compute hull (after input): 0.408
1591315228 Test 10 runs in 6 seconds (ave. 600 msec) -- rbox 500 W1e-13 D6 t1 | qhull 

============================
== Time for Delaunay triangulation of random points
== qh_findbesthorizon, qh_distplane, qh_update_vertexneighbors_cone, qh_makenew_simplicial
============================

Testing -- rbox 100000 D2 t1 | qhull d Qbb Qz >/d/bash/var/tmp/qtest-2020-06-04/qhull-421233.log
Test -- t1
  CPU seconds to compute hull (after input): 0.782
Test -- t2
  CPU seconds to compute hull (after input): 0.756
Test -- t3
  CPU seconds to compute hull (after input): 0.778
Test -- t4
  CPU seconds to compute hull (after input): 0.742
Test -- t5
  CPU seconds to compute hull (after input): 0.724
Test -- t6
  CPU seconds to compute hull (after input): 0.807
Test -- t7
  CPU seconds to compute hull (after input): 0.717
Test -- t8
  CPU seconds to compute hull (after input): 0.807
Test -- t9
  CPU seconds to compute hull (after input): 0.745
Test -- t10
  CPU seconds to compute hull (after input): 0.721
1591315243 Test 10 runs in 14 seconds (ave. 1400 msec) -- rbox 100000 D2 t1 | qhull d Qbb Qz

Testing -- rbox 50000 D3 t1 | qhull d Qbb Qz >/d/bash/var/tmp/qtest-2020-06-04/qhull-889911.log
Test -- t1
  CPU seconds to compute hull (after input): 1.703
Test -- t2
  CPU seconds to compute hull (after input): 1.693
Test -- t3
  CPU seconds to compute hull (after input): 1.048
Test -- t4
  CPU seconds to compute hull (after input): 1.599
Test -- t5
  CPU seconds to compute hull (after input): 1.669
Test -- t6
  CPU seconds to compute hull (after input): 1.064
Test -- t7
  CPU seconds to compute hull (after input): 1.661
Test -- t8
  CPU seconds to compute hull (after input): 1.646
Test -- t9
  CPU seconds to compute hull (after input): 1.031
Test -- t10
  CPU seconds to compute hull (after input): 1.027
1591315265 Test 10 runs in 21 seconds (ave. 2100 msec) -- rbox 50000 D3 t1 | qhull d Qbb Qz

Testing -- rbox 10000 D4 t1 | qhull d Qbb Qz >/d/bash/var/tmp/qtest-2020-06-04/qhull-626405.log
Test -- t1
  CPU seconds to compute hull (after input): 1.413
Test -- t2
  CPU seconds to compute hull (after input): 1.377
Test -- t3
  CPU seconds to compute hull (after input): 1.453
Test -- t4
  CPU seconds to compute hull (after input): 1.396
Test -- t5
  CPU seconds to compute hull (after input): 1.384
Test -- t6
  CPU seconds to compute hull (after input): 1.453
Test -- t7
  CPU seconds to compute hull (after input): 1.359
Test -- t8
  CPU seconds to compute hull (after input): 1.515
Test -- t9
  CPU seconds to compute hull (after input): 1.427
Test -- t10
  CPU seconds to compute hull (after input): 1.385
1591315286 Test 10 runs in 20 seconds (ave. 2000 msec) -- rbox 10000 D4 t1 | qhull d Qbb Qz

Testing -- rbox 1000 D5 t1 | qhull d Qbb Qz >/d/bash/var/tmp/qtest-2020-06-04/qhull-829422.log
Test -- t1
  CPU seconds to compute hull (after input): 0.674
Test -- t2
  CPU seconds to compute hull (after input): 0.662
Test -- t3
  CPU seconds to compute hull (after input): 0.683
Test -- t4
  CPU seconds to compute hull (after input): 0.677
Test -- t5
  CPU seconds to compute hull (after input): 0.697
Test -- t6
  CPU seconds to compute hull (after input): 0.638
Test -- t7
  CPU seconds to compute hull (after input): 0.67
Test -- t8
  CPU seconds to compute hull (after input): 0.667
Test -- t9
  CPU seconds to compute hull (after input): 0.658
Test -- t10
  CPU seconds to compute hull (after input): 0.696
1591315296 Test 10 runs in 10 seconds (ave. 1000 msec) -- rbox 1000 D5 t1 | qhull d Qbb Qz

Testing -- rbox 200 D6 t1 | qhull d Qbb Qz >/d/bash/var/tmp/qtest-2020-06-04/qhull-164192.log
Test -- t1
  CPU seconds to compute hull (after input): 0.353
Test -- t2
  CPU seconds to compute hull (after input): 0.376
Test -- t3
  CPU seconds to compute hull (after input): 0.384
Test -- t4
  CPU seconds to compute hull (after input): 0.366
Test -- t5
  CPU seconds to compute hull (after input): 0.405
Test -- t6
  CPU seconds to compute hull (after input): 0.374
Test -- t7
  CPU seconds to compute hull (after input): 0.382
Test -- t8
  CPU seconds to compute hull (after input): 0.353
Test -- t9
  CPU seconds to compute hull (after input): 0.388
Test -- t10
  CPU seconds to compute hull (after input): 0.375
1591315303 Test 10 runs in 6 seconds (ave. 600 msec) -- rbox 200 D6 t1 | qhull d Qbb Qz

====================
== Time for Delaunay triangulation of regular mesh, integer coordinates
====================

Testing -- rbox 100000 M3,4 z D2 t1 | qhull QR3 d Qt Qbb >/d/bash/var/tmp/qtest-2020-06-04/qhull-432008.log
Test -- t1
  CPU seconds to compute hull (after input): 0.81
Test -- t2
  CPU seconds to compute hull (after input): 0.784
Test -- t3
  CPU seconds to compute hull (after input): 0.791
Test -- t4
  CPU seconds to compute hull (after input): 0.812
Test -- t5
  CPU seconds to compute hull (after input): 0.795
Test -- t6
  CPU seconds to compute hull (after input): 0.761
Test -- t7
  CPU seconds to compute hull (after input): 0.789
Test -- t8
  CPU seconds to compute hull (after input): 0.772
Test -- t9
  CPU seconds to compute hull (after input): 0.851
Test -- t10
  CPU seconds to compute hull (after input): 0.794
1591315322 Test 10 runs in 18 seconds (ave. 1800 msec) -- rbox 100000 M3,4 z D2 t1 | qhull QR3 d Qt Qbb

Testing -- rbox 20000 M3,4,5 z D3 t1 | qhull QR3 d Qt Qbb >/d/bash/var/tmp/qtest-2020-06-04/qhull-568071.log
Test -- t1
  CPU seconds to compute hull (after input): 0.908
Test -- t2
  CPU seconds to compute hull (after input): 0.847
Test -- t3
  CPU seconds to compute hull (after input): 0.887
Test -- t4
  CPU seconds to compute hull (after input): 0.869
Test -- t5
  CPU seconds to compute hull (after input): 0.862
Test -- t6
  CPU seconds to compute hull (after input): 0.89
Test -- t7
  CPU seconds to compute hull (after input): 0.889
Test -- t8
  CPU seconds to compute hull (after input): 0.893
Test -- t9
  CPU seconds to compute hull (after input): 0.899
Test -- t10
  CPU seconds to compute hull (after input): 0.91
1591315337 Test 10 runs in 14 seconds (ave. 1400 msec) -- rbox 20000 M3,4,5 z D3 t1 | qhull QR3 d Qt Qbb

Testing -- rbox 5000 M3,4,5 z D4 t1 | qhull QR3 d Qt Qbb >/d/bash/var/tmp/qtest-2020-06-04/qhull-570226.log
Test -- t1
  CPU seconds to compute hull (after input): 0.867
Test -- t2
  CPU seconds to compute hull (after input): 0.924
Test -- t3
  CPU seconds to compute hull (after input): 0.867
Test -- t4
  CPU seconds to compute hull (after input): 0.966
Test -- t5
  CPU seconds to compute hull (after input): 0.852
Test -- t6
  CPU seconds to compute hull (after input): 0.85
Test -- t7
  CPU seconds to compute hull (after input): 0.957
Test -- t8
  CPU seconds to compute hull (after input): 0.881
Test -- t9
  CPU seconds to compute hull (after input): 0.89
Test -- t10
  CPU seconds to compute hull (after input): 0.874
1591315352 Test 10 runs in 14 seconds (ave. 1400 msec) -- rbox 5000 M3,4,5 z D4 t1 | qhull QR3 d Qt Qbb

Testing -- rbox 1500 M3,4,5 z D5 t1 | qhull QR3 d Qt Qbb >/d/bash/var/tmp/qtest-2020-06-04/qhull-38904.log
Test -- t1
  CPU seconds to compute hull (after input): 0.97
Test -- t2
  CPU seconds to compute hull (after input): 0.985
Test -- t3
  CPU seconds to compute hull (after input): 0.998
Test -- t4
  CPU seconds to compute hull (after input): 1.012
Test -- t5
  CPU seconds to compute hull (after input): 0.998
Test -- t6
  CPU seconds to compute hull (after input): 0.978
Test -- t7
  CPU seconds to compute hull (after input): 0.97
Test -- t8
  CPU seconds to compute hull (after input): 0.988
Test -- t9
  CPU seconds to compute hull (after input): 0.96
Test -- t10
  CPU seconds to compute hull (after input): 1.035
1591315367 Test 10 runs in 14 seconds (ave. 1400 msec) -- rbox 1500 M3,4,5 z D5 t1 | qhull QR3 d Qt Qbb

Testing -- rbox 500 M3,4,5 z D6 t1 | qhull QR3 d Qt Qbb >/d/bash/var/tmp/qtest-2020-06-04/qhull-41059.log
Test -- t1
  CPU seconds to compute hull (after input): 0.807
Test -- t2
  CPU seconds to compute hull (after input): 0.789
Test -- t3
  CPU seconds to compute hull (after input): 0.877
Test -- t4
  CPU seconds to compute hull (after input): 0.866
Test -- t5
  CPU seconds to compute hull (after input): 0.853
Test -- t6
  CPU seconds to compute hull (after input): 0.779
Test -- t7
  CPU seconds to compute hull (after input): 0.794
Test -- t8
  CPU seconds to compute hull (after input): 0.838
Test -- t9
  CPU seconds to compute hull (after input): 0.792
Test -- t10
  CPU seconds to compute hull (after input): 0.854
1591315380 Test 10 runs in 13 seconds (ave. 1300 msec) -- rbox 500 M3,4,5 z D6 t1 | qhull QR3 d Qt Qbb

====================
== Time for Voronoi diagram of regular mesh
====================
Testing -- rbox 100000 M3,4 z D2 | qhull v Qbb >/d/bash/var/tmp/qtest-2020-06-04/qhull-976260.log
Test -- QR1
  CPU seconds to compute hull (after input): 0.786
Test -- QR2
  CPU seconds to compute hull (after input): 0.794
Test -- QR3
  CPU seconds to compute hull (after input): 0.794
Test -- QR4
  CPU seconds to compute hull (after input): 0.758
Test -- QR5
  CPU seconds to compute hull (after input): 0.809
Test -- QR6
  CPU seconds to compute hull (after input): 0.774
Test -- QR7
  CPU seconds to compute hull (after input): 0.792
Test -- QR8
  CPU seconds to compute hull (after input): 0.825
Test -- QR9
  CPU seconds to compute hull (after input): 0.758
Test -- QR10
  CPU seconds to compute hull (after input): 0.777
1591315393 Test 10 runs in 12 seconds (average 1200 msec) -- rbox 100000 M3,4 z D2 | qhull v Qbb
Testing -- rbox 20000 M3,4,5 z | qhull v Qbb >/d/bash/var/tmp/qtest-2020-06-04/qhull-911461.log
Test -- QR1
  CPU seconds to compute hull (after input): 0.861
Test -- QR2
  CPU seconds to compute hull (after input): 0.86
Test -- QR3
  CPU seconds to compute hull (after input): 0.973
Test -- QR4
  CPU seconds to compute hull (after input): 0.854
Test -- QR5
  CPU seconds to compute hull (after input): 0.888
Test -- QR6
  CPU seconds to compute hull (after input): 0.917
Test -- QR7
  CPU seconds to compute hull (after input): 0.922
Test -- QR8
  CPU seconds to compute hull (after input): 0.883
Test -- QR9
  CPU seconds to compute hull (after input): 0.882
Test -- QR10
  CPU seconds to compute hull (after input): 0.893
1591315405 Test 10 runs in 12 seconds (average 1200 msec) -- rbox 20000 M3,4,5 z | qhull v Qbb
Testing -- rbox 5000 M3,4,5 z D4 | qhull v Qbb >/d/bash/var/tmp/qtest-2020-06-04/qhull-313185.log
Test -- QR1
  CPU seconds to compute hull (after input): 0.917
Test -- QR2
  CPU seconds to compute hull (after input): 0.894
Test -- QR3
  CPU seconds to compute hull (after input): 0.838
Test -- QR4
  CPU seconds to compute hull (after input): 0.893
Test -- QR5
  CPU seconds to compute hull (after input): 0.918
Test -- QR6
  CPU seconds to compute hull (after input): 0.879
Test -- QR7
  CPU seconds to compute hull (after input): 0.895
Test -- QR8
  CPU seconds to compute hull (after input): 0.993
Test -- QR9
  CPU seconds to compute hull (after input): 0.885
Test -- QR10
  CPU seconds to compute hull (after input): 1.034
1591315417 Test 10 runs in 11 seconds (average 1100 msec) -- rbox 5000 M3,4,5 z D4 | qhull v Qbb
Testing -- rbox 1500 M3,4,5 z D5 | qhull v Qbb >/d/bash/var/tmp/qtest-2020-06-04/qhull-714909.log
Test -- QR1
  CPU seconds to compute hull (after input): 1.049
Test -- QR2
  CPU seconds to compute hull (after input): 0.996
Test -- QR3
  CPU seconds to compute hull (after input): 0.989
Test -- QR4
  CPU seconds to compute hull (after input): 0.974
Test -- QR5
  CPU seconds to compute hull (after input): 0.936
Test -- QR6
  CPU seconds to compute hull (after input): 0.959
Test -- QR7
  CPU seconds to compute hull (after input): 0.872
Test -- QR8
  CPU seconds to compute hull (after input): 0.95
Test -- QR9
  CPU seconds to compute hull (after input): 0.952
Test -- QR10
  CPU seconds to compute hull (after input): 1.055
1591315429 Test 10 runs in 12 seconds (average 1200 msec) -- rbox 1500 M3,4,5 z D5 | qhull v Qbb
Testing -- rbox 500 M3,4,5 z D6 | qhull v Qbb >/d/bash/var/tmp/qtest-2020-06-04/qhull-116633.log
Test -- QR1
  CPU seconds to compute hull (after input): 0.927
Test -- QR2
  CPU seconds to compute hull (after input): 0.773
Test -- QR3
  CPU seconds to compute hull (after input): 0.841
Test -- QR4
  CPU seconds to compute hull (after input): 0.837
Test -- QR5
  CPU seconds to compute hull (after input): 0.872
Test -- QR6
  CPU seconds to compute hull (after input): 0.696
Test -- QR7
  CPU seconds to compute hull (after input): 0.789
Test -- QR8
  CPU seconds to compute hull (after input): 0.905
Test -- QR9
  CPU seconds to compute hull (after input): 0.793
Test -- QR10
  CPU seconds to compute hull (after input): 0.796
1591315440 Test 10 runs in 10 seconds (average 1000 msec) -- rbox 500 M3,4,5 z D6 | qhull v Qbb
